GR-DVL9600 GR-DVL9500 - JVC

FOCUS
EXPOSURE
W. BALANCE
4FADER
/ WIPE
P. AE
/ EFFECT
FLASH ADJ.
MANUAL
WH
END
PAUSE
AUTO
AUTO
AUTO
OFF
OFF
PLAYOFF
FADER / WIPE
P WIPE–SHUTTER
? R RANDOM
OFF
SEL. 4 WH FADER–WHITE
BK FADER–BLACK
B W FADER–B.W
WIPE–CORNER
[Ex.:
Select Dial
Fade-in
Recording Start/Stop Button
Display
0
FADER – WHITE]
5S
Power lamp
Lock Button
Power Switch
Manual Mode Item
Menu
FADER/WIPE Menu
Fade/Wipe Effects
EN31
IMPORTANT:
If certain modes of Programme AE with special effects
( pg. 34) are activated, some Fade/Wipe Effects cannot
be used. If you select a Fade/Wipe Effect that is unusable
in the current situation, the indication blinks.
These effects let you make pro-style scene transitions. Use
these to spice up the transition from one scene to the next.
You can also vary transitions from scene to scene.
EFFECT SELECTION
1
SELECT OPERATION MODE
Set the Power Switch to “ ” or “ ” while pressing
down the Lock Button located on the switch, and pull
out the viewfinder fully or open the LCD monitor
fully.
2
ACCESS MANUAL MODE ITEM MENU
Press the Select Dial. The Manual Mode Item Menu
appears.
3
ACCESS “FADER/WIPE” MENU
Rotate the Select Dial to move the highlight bar to
“FADER/WIPE”, then press it.
4
SELECT EFFECT
Rotate the Select Dial to move the highlight bar to the
desired function, then press it.
•The FADER/WIPE Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
FADE/WIPE SELECTION
( , , , , , , , ,
and )
A scene gradually appears on a black, white, or black-andwhite
screen (Fade-in or Wipe-in); or disappears, leaving a
black, white, or black-and-white screen (Fade-out or
Wipe-out).
Fade or Wipe works when recording is started or when
you stop recording.
Before the following step, perform the above steps 1
through 4.
5
START OR END RECORDING
Press the Recording Start/Stop Button to activate
Fade-in/out or Wipe-in/out.
NOTE:
pg. 32.
Fade-out