GR-DVL9600 GR-DVL9500 - JVC

I N OUT MODE
1 WH 00 : 25 ~ 02 : 05 P ––
2 P 07 : 18 ~ 08 : 31 ––
3 –– 03 : 33 ~ 05 : 53 B/W
4 09 : 30 ~ 13 : 15
5 15 : 55 ~ 16 : 20 –– ––
6 –– –– : –– ~
7 ~
8 ~
TIME CODE
TOTAL
STOP (5) Button
REW (2) Button
PAUSE (6) Button
Recording Start/Stop Button
16 : 30
9 : 39
4
Random Assemble
Editing Menu
Remote Sensor
EN61
AUTOMATIC EDITING TO VCR
PREPARE SOURCE TAPE
11 Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE (6).
ENGAGE VCR’S RECORD-PAUSE MODE
12 Point the remote control towards the VCR’s remote
sensor and press VCR REC STBY (q6), or manually
engage the VCR’s Record-Pause mode.
START EDITING
13 Press the Recording Start/Stop Button on the
camcorder. Editing proceeds as programmed, right
through to the end of the last registered scene.
•Pressing START/STOP on the remote control does
not start editing.
•When dubbing is complete, the camcorder enters
the Pause mode, and the recording deck enters its
Record-Standby mode.
•If you do not register an Edit-Out point, the tape will
be dubbed all the way to the end automatically.
14 1
STOP EDITING
Engage the Stop modes for the camcorder and the
VCR.
To make the R.A.Edit counter display disappear, press
R.A.EDIT ON/OFF on the remote control.
NOTES:
● Pressing R.A.EDIT ON/OFF on the remote control clears
all settings registered during Random Assemble Editing.
● When the editing cable is connected to the Pause
terminal during dubbing, make sure the remote control
is pointed at the VCR’s sensor, and that the path between
the two is unobstructed.
● Random Assemble Editing may not function properly
when using a tape including several duplicated Time
Codes ( pg. 19).
RM-V711U
(provided)
T
W
FADE/WIPE
EFFECT
EDIT IN/OUT
CANCEL
PAUSE
R.A.EDIT
ON/OFF
VCR REC STBY