GR-DVL9600 GR-DVL9500 - JVC
GR-DVL9600 GR-DVL9500 - JVC
GR-DVL9600 GR-DVL9500 - JVC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
32 EN<br />
Previous scene end<br />
,,,<br />
,,,,<br />
,,,,<br />
,,,,<br />
,,, ,,,<br />
,,,, ,,,,<br />
,,,, ,,,,<br />
,,,, ,,,,<br />
Wipe-in<br />
Recording Start/Stop Button<br />
[Ex.:<br />
Within 5 minutes . . .<br />
WIPE – SCROLL]<br />
RECORDING Advanced Features (cont.)<br />
PICTURE WIPE OR DISSOLVE SELECTION<br />
( , , , , , and<br />
)<br />
Combine the Picture Wipe and Dissolve functions for a<br />
professional transition effect. There are 6 Picture Wipe<br />
effects and 1 Dissolve effect. The Picture Wipe or Dissolve<br />
works when recording is started.<br />
Before the following steps, perform steps 1 through 4 on<br />
pg. 31.<br />
5<br />
STORE SCENE IN MEMORY<br />
Engage the Record-Standby mode.<br />
If you select Picture Wipe/Dissolve during<br />
recording . . .<br />
.... press the Recording Start/Stop Button when one<br />
scene is finished. The point at which the scene<br />
ended is stored in memory.<br />
If you select Picture Wipe/Dissolve during Record-<br />
Standby mode . . .<br />
.... press the Recording Start/Stop Button to start<br />
recording and press it again when one scene is<br />
finished. The point at which the scene ended is<br />
stored in memory.<br />
If you select Picture Wipe/Dissolve during Record-<br />
Standby mode after performing a Picture Wipe/<br />
Dissolve . . .<br />
.... the point at which the scene ended is already<br />
stored in memory.<br />
6<br />
START RECORDING<br />
If you start recording a new scene within 5 minutes of<br />
the end of the previous recording (without having<br />
turned the camcorder’s power off), the previous scene<br />
wipes out, revealing the new scene.<br />
NOTES:<br />
● You can extend the length of a Fade or Wipe by pressing<br />
and holding the Recording Start/Stop Button.<br />
● If the power is turned off after a scene is finished<br />
recording, the stored point is erased.<br />
This disables the Picture Wipe/Dissolve combination.<br />
When this happens, the Picture Wipe/Dissolve indicator<br />
blinks. Try recording again, but do not turn the power off<br />
when you are finished. Please be advised that power<br />
also shuts off automatically if 5 minutes elapse in the<br />
Record-Standby mode.<br />
● The sound at the end of the last recorded scene is not<br />
stored.<br />
● When “DIS” is set to “ON” ( pg. 29), Picture Wipe/<br />
Dissolve is disabled.