GR-DVL9600 GR-DVL9500 - JVC

44 EN
STOP (5) Button
REW (2) Button
FF (3) Button
PLAY/PAUSE (6/4) Button
PLAYBACK Basic Playback (cont.)
FEATURE: Still Playback
PURPOSE:
To pause during playback.
OPERATION:
1) Press PLAY/PAUSE (6/4) during playback.
2) To resume normal playback, press PLAY/PAUSE
(6/4) again.
NOTES:
● If still playback continues for more than about 3
minutes, the camcorder’s Stop mode is automatically
engaged. After 5 minutes in the Stop mode,
the camcorder’s power is automatically turned off.
● When PLAY/PAUSE (6/4) is pressed, the image may
not pause immediately so that the camcorder can
stabilize the still image. During this time, if PAUSE
(6) on the remote control is pressed, Slow-Motion
Playback will start. This is not a malfunction.
FEATURE: Shuttle Search
PLAYOFF
5S
Power lamp
Lock Button
Power Switch
PURPOSE:
To allow high-speed search in either direction.
OPERATION:
1) Press FF (3) to forward or press REW (2) to
reverse during playback.
2) To resume normal playback, press PLAY/PAUSE
(6/4).
NOTES:
● During playback, press and hold REW (2) or
FF (3). The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
● A slight mosaic effect appears on screen during
Shuttle Search. This is not a malfunction.
FEATURE: Slow-Motion Playback
Available only with the RM-V711U remote control
(provided) ( pg. 56).
FEATURE: Frame-By-Frame Playback
Available only with the RM-V711U remote control
(provided) ( pg. 56).
FEATURE: Playback Zoom
Available only with the RM-V711U remote control
(provided) ( pg. 56).
FEATURE: Playback Special Effects
Available only with the RM-V711U remote control
(provided) ( pg. 57).