GR-DVL9600 GR-DVL9500 - JVC
GR-DVL9600 GR-DVL9500 - JVC
GR-DVL9600 GR-DVL9500 - JVC
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PLAYBACK EFFECT<br />
4OFF<br />
1<br />
2 B/W<br />
3<br />
4<br />
5<br />
CLASSIC FILM<br />
MONOTONE<br />
SEPIA<br />
STROBE<br />
VIDEO ECHO<br />
PLAYBACK EFFECT<br />
Select Menu<br />
PLAY (4) Button<br />
Remote sensor<br />
PLAYOFF<br />
Power Switch<br />
5S<br />
FEATURE: Playback Special Effects<br />
EN57<br />
PURPOSE:<br />
To allow you to add creative effects to the playback<br />
image. You can use any one of the 5 effects.<br />
OPERATION:<br />
1) To start playback, press PLAY (4).<br />
2) Point the remote control at the camcorder's remote<br />
sensor and press EFFECT. The PLAYBACK EFFECT<br />
Select Menu appears.<br />
3) Move the highlight bar to the desired effect by<br />
pressing EFFECT. The selected function is activated<br />
and after 2 seconds the menu disappears.<br />
To deactivate the selected effect, press EFFECT ON/<br />
OFF on the remote control. Pressing it again reactivates<br />
the selected effect.<br />
To change the selected effect, repeat from step 2 of<br />
the above “OPERATION”.<br />
NOTES:<br />
● When Playback Special Effects are used, the Multi-<br />
Analyser 4 and Multi-Analyser 9 Snapshot modes<br />
( pg. 25) are not available.<br />
● For images recorded in High Speed Recording<br />
mode, “CLASSIC FILM”, “STROBE” and “VIDEO<br />
ECHO” are disabled.<br />
● The effects that can be used during playback are<br />
Classic Film, Monotone, Sepia, Strobe and Video<br />
Echo. The effects work the same in playback as they<br />
did in recording. Refer to page 35 for more<br />
information.<br />
T<br />
W<br />
PLAY<br />
EFFECT<br />
EFFECT ON/OFF<br />
RM-V711U<br />
(provided)