On-Board® W Module Programming and Operation ... - PTB Sales
On-Board® W Module Programming and Operation ... - PTB Sales
On-Board® W Module Programming and Operation ... - PTB Sales
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>On</strong>-Board W <strong>Module</strong> <strong>Programming</strong> <strong>and</strong> <strong>Operation</strong><br />
CTI-CRYOGENICS<br />
HELIX TECHNOLOGY CORPORATION<br />
Delay Start<br />
1. Press the REGEN key on the keypad/display. The current<br />
REGEN status is displayed.<br />
2. Press the Next key. The current delay start time value is displayed<br />
in hours.<br />
3. Press the Enter key. The current value is underlined <strong>and</strong> ready to<br />
accept a new value.<br />
4. Press the numeral keys for the desired delay time. For example: 1,<br />
5 for 1.5, or 1, 5, <strong>and</strong> 0 for 15.0. The range of values is 0 - 999.9<br />
hours.<br />
NOTE: The Clear key may be pressed if incorrect data has been entered.<br />
The <strong>On</strong>-Board module allows the user to enter the new value.<br />
5. Press the Enter key. Delay start programming is complete.<br />
6. Press the MONITOR key. The <strong>On</strong>-Board microprocessor will<br />
monitor system operation.<br />
Delay Restart<br />
1. Press the REGEN key on the keypad/display. The current<br />
REGEN status is displayed.<br />
2. Press the Next key until the current delay restart time value is<br />
displayed in hours.<br />
3. Press the Enter key. The current value is underlined <strong>and</strong> ready to<br />
accept a new value.<br />
4. Press the numeral keys for the desired delay time. For example: 1,<br />
5 for 1.5, or 1, 5, <strong>and</strong> 0 for 15.0. The range of values is 0 - 999.9<br />
hours.<br />
NOTE: The Clear key may be pressed if incorrect data has been entered.<br />
The <strong>On</strong>-Board module allows the user to enter the new value.<br />
5. Press the Enter key. Delay restart programming is complete.<br />
6. Press the MONITOR key. The <strong>On</strong>-Board microprocessor will<br />
monitor system operation.<br />
Repurge<br />
1. Press the REGEN key on the keypad/display. The current<br />
REGEN status is displayed.<br />
P/N 8040365 3-17