SunTouch® - Pentair
SunTouch® - Pentair
SunTouch® - Pentair
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
78<br />
Appendix<br />
Emergency Shut-Off Switch (ESO3)<br />
Emergency Shut-Off switch<br />
The SunTouch system can be used for commercial spa applications that require an Emergency Shut-Off<br />
(ESO3) switch. It can be installed with new or existing pool and spa system. In the event of an emergency, the<br />
spa can be shut off by pushing the red emergency button. This action interrupts power to the filter pump, jet<br />
pump, an optional auxiliary pump, air blower, or equipment connected to AUX 1, or AUX 2. Pulling the<br />
emergency button back out will return the pumps to normal operation, and shut off the alarm.<br />
Location<br />
Select a convenient location to mount the Emergency Shut-Off switch. Provide a double-gang electrical box.<br />
The electrical box must be rated for outdoor use if the Emergency Shut-Off is located outside. Provide and<br />
install a standard spring-wound timer for the jet pump and filter pump. Install cable, using plastic or metallic<br />
conduit where cables run underground.<br />
EMERGENCY SHUT OFF<br />
ALARM<br />
SUB PANEL<br />
CIRCUIT BREAKERS<br />
SPA JETS<br />
OFF<br />
SunTouch<br />
Power Center<br />
15<br />
5<br />
10<br />
TIMER<br />
Spring-wound timer not included.<br />
filter pump<br />
jet pump(s)<br />
FILTER PUMP PUMP JET PUMP 2 (opt.)<br />
Low Voltage<br />
High Voltage<br />
Commercial Application<br />
See “Commercial Application using ESO3 and SunTouch (Single Body System) on page 36 for information.<br />
SunTouch Solar, Pool and Spa Control System Installation and User’s Guide