V750-series UHF RFID System User's Manual - PLCeasy

*1) About the Error code:
If the error is indicated as XXX(YY), Setting Error has occurred. XXX means error cause and YY means
error type (see below error code list).
If the error is indicated as ZZ, it means System Error has occurred. ZZ means error code.
On Setting Error, reason of the error is displayed with both error code and the description.
On System Error, only error code is displayed.
Setting Error code and Description list
Description (XXX) Status code (YY) Error type
DHCP Server 31 DHCP Server error
Comm. Settings 33 Communication setting error
Comm. Settings 35 Communication setting error
Operation Settings 36 Operation setting error
Reader Settings 37 Reader setting error
Action
[Reset System]
To reboot the system, push the [Reset System] button. After rebooting the reader, you can access
the browser by clicking Reload button or opening another browser.
Errors
1) Can No Connect
It means that the host computer can not receive the data from the reader. In this case, you have to
check the Ethernet connection, restart the browser and then access the reader again.
104 of 135