V750-series UHF RFID System User's Manual - PLCeasy

Description of Each Item
RF Control
Item Description The range of the set code. Default
Antenna Power Power (dBm) of each
antenna (from 1 to 4)
10.0 to 32.0
(Truncate by 0.5.
Ex. 10.3 is truncated to 10.0
Every antenna:
30.5
Session
Session number of Gen2
protocol.
(set for Multi sequence and
Single sequence respectively)
and 10.8 is truncated to 10.5.)
0 / 1 / 2 / 3 SOC/MOC - 0
SRP/MRP - 2
Mode Communication mode Normal / DRM Normal
EPC word len EPC word length 0 to 32 (step 1) 0
Filtering
Item Description The range of the set code. Default
Condition Selection Determines filtering
None / 1 / 2 / 1 and 2 / (None)
condition
1 or 2
Condition 1 Set value of the Condition 1
Bank Communication data bit 0 to 3
(None)
length
(including threshold values)
Pointer Comparison start point 0 to 255
(None)
(including threshold values).
Length Comparison bit length 1 to 255
(None)
(including threshold values)
Data Comparison data Data length/ more than 1 or
more and 64 or less
(None)
Condition 2 Set value of the Condition 2
Bank Communication data bit
length
0 to 3
(including threshold values)
Pointer Comparison start point 0 to 255
(including threshold values).
Length Comparison bit length 1 to 255
(including threshold values)
Data Comparison data Hex string whose length is 1
or more and 64 or less
(None)
(None)
(None)
(None)
Smoothing
Item Description The range of the set code. Default
Smoothing Buffer Prevents rereading 0 to 999
0
(including threshold values)
Omit Response Omits response for no tag Disable / Enable Disable
109 of 135