V750-series UHF RFID System User's Manual - PLCeasy
V750-series UHF RFID System User's Manual - PLCeasy
V750-series UHF RFID System User's Manual - PLCeasy
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2) Single Repeat<br />
The reader communicates with a single tag at a time (one-to-one communication) and repeats the<br />
communication transaction. When the reader detects the first tag, it returns response to the host, then it begins<br />
the next transaction repeatedly. Whenever it detects an unread tag, it reads the tag and returns read results to<br />
the host. It repeats the transaction until the termination command has been sent.<br />
< A sequence when the reader detects tags one by one as it repeats the transaction.><br />
Period (Timeout)<br />
Host<br />
Command<br />
Read tag<br />
Response<br />
Tag No.:1<br />
Tag ID:A<br />
Response<br />
Tag No.:1<br />
Tag ID:B<br />
Reader<br />
Process<br />
Reading tag<br />
Process<br />
Reading tag<br />
Process<br />
Reading tag<br />
Just after the reader<br />
communicates a tag, it<br />
returns a response<br />
(reporting the read tag<br />
data) to the host.<br />
Tag<br />
Tag<br />
A<br />
Tag<br />
B<br />
Tag<br />
C<br />
< A sequence when the reader carries out the transaction repeatedly and there is no tag. ><br />
Period (Timeout)<br />
Period (Timeout)<br />
Host<br />
Command<br />
Read tag<br />
Response<br />
Tag No.:0<br />
Tag ID:None<br />
Response<br />
Tag No.:0<br />
Tag ID:None<br />
Reader<br />
Process<br />
Reading tag<br />
Process<br />
Reading tag<br />
At the end of the specified<br />
period, the reader returns a<br />
response (reporting “no<br />
tag”) to the host.<br />
Tag<br />
48 of 135