V750-series UHF RFID System User's Manual - PLCeasy

3.1.5.2 Reader Status, Reader Settings Function
To set the Reader Status and Reader Settings, following items shall be specified in the SET Reader command
(SETR) and GET Reader command (GETR). The Reader Status is available only for reading data.
Reader Status [Static / Read only] (GETR)
Code Content Fixed Value (=Factory Settings)
MFT Manufacturer “OMRON Corporation”
TYP Type of the reader “V750-BA50D04-SG” or “V750-BA50D04-SG-MY”
FWV Firmware version xxx-xxx-xxx-x
SER Serial number “xxxxxxxx”
MAC MAC address 00:00:0A:89:xx:xx
Reader Status [Dynamic / Read only] (GETR)
Code Content Variable Value
ATS Antenna status
(Connected Antenna)
TTK Transition time from kick hhhh:mm:ss
-Min: 00:00:00
-Max: 9999:59:59
xxxxx (x:1 to 4)
-ex1. All antennas are connected: 1234
-ex2. Antenna #1 and antenna #4 are connected: 14
Reader Settings [Reader Information] (GETR/SETR)
Code Content User Setting Value Factory Settings
RNM Reader name Given string
(None)
-Min: 1 characters , ASCII
-Max: 63 characters, ASCII
-Note: This setting value has double
quotation marks.
RRL Reader’s role Given string
-Min: 1 characters , ASCII
-Max: 63 characters , ASCII
-Note: This setting value has double
quotation marks.
(None)
74 of 135