V750-series UHF RFID System User's Manual - PLCeasy

3.1.5.4 Operation Settings
Specifying following option in the operation setting command (SETO) or operation read command (GETO)
enables to set or read the reader’s operation settings.
Operation Settings [Command Entry] (GETO/SETO)
Code Content User Setting Value Factory Settings
RIF Response Interface Choice
1:Ethernet
0:None
1:Ethernet
2:RS-232C
IEC Command to be
execute at startup.
Given string
Format: Function(S)”Command”
(None)
Function
0: unregistered
1: execute command
IN1
Input port #1 function
setting
“Command”
Command to be execute
ex. “RDID –seq SOC –tmo 500”
-Max: 255 characters, ASCII
-Note: This setting value has double
quotation marks.
Format: Function(S)Timing(S)”Command”
Function
0:None
1:Command execution
(None)
Timing
0:Startup (Fixed)
IN2
IN3
IN4
Input port #2 function
setting
Input port #3 function
setting
Input port #4 function
setting
“Command”
Command to be execute
Ex. “RDID –seq SOC –tmo 500”
-Max: 255 characters, ASCII
-Note: This setting value has double
quotation marks.
-Note: Only when the Function is specified
with “1”, set the Timing and the “Command”.
When the Function is specified with “0”,
executed “Command” data is saved and
response data is returned.
Same as IN1
Same as IN1
Same as IN1
(None)
(None)
(None)
82 of 135