Load Catalogue (PDF, 58 MB) - Schuch

Polyester Damp Room Light Fitting
without Diffusers
Series 175…
Application:
Humid, wet and dusty environments in industrial
and agricultural locations, workshops,
car parks, cellars, kitchens and civil
defence premises. (Please contact us with
regards to use where detergents and similar
chemical materials are present!).
Design:
Housing: glass fibre reinforced polyester
with inserted stud bolts.
Gasket: temperature-proof, weather-resistant,
non-ageing and chemical-resistant
profile gasket.
Electrical components: mounted internally
on the hinged light fitting cover.
Starters: easily accessible from outside.
Damp room lamp holder: with with turn
contacts and neoprene gasket.
Cable entries: variable, at the top and
ends of the housing; 1 threaded blanking
plug M20, looping of incoming mains
cable at one side of the fitting is possible.
Cable entries are pre-pressed.
Connection: 3-pole terminal block.
Mounting: closed „knock-outs“ for ceiling
mounting, rubber gaskets and washers
for sealing are inside the fitting.
Options:
See “Further Series / Equipment”.
SCHUCH quality - Your advantage:
Additional cable entries (knock-outs)
Series 175 1… Series 175 2…
• sturdy, extremely resilient and chemical resistant quality light fitting
– thick wall glass fibre reinforced polyester enclosure
– high stability due to moulded-in stud bolts with self sealing nuts
– shock resistent up to 16g
• easy to install and maintain
– starter easily accessible from outside
– easily adaptable to all local structural conditions due to the variable cable entries; quick and economic
single end IN-OUT wiring eliminates the classic through wiring.
• all-purpose due to large of number of variations and comprehensive accessories
– with mirror finish reflector (turn-and-engage reflector system) for an economic solution where adjustable
light direction is required.
– series 175...H for ambient temperatures up to +50°C/+60°C
– series 175...S38/S50 with PC-protective tubes Ø 38mm and Ø 50mm with internal prism and integrated
mirror reflector for adjustable light direction.
– series 175...SO with hinged oval protective tubes and optimised mirror reflector with a high light coefficient
(over 70%) as a simple solution for necessary or desired light direction.
– series 175.../1 or .../3 for emergency lighting (see catalogue section „Emergency Lighting”
175...
IP65
175 1...
175 2.. EVG
T 26
Type Article no. 1) Lamps Weight
W ca. kg 2)
with low loss conventional ballast
175 118 17500 0001 1 x T 26/18 W 1,2
175 136 17500 0004 1 x T 26/36 W 1,8
175 158 17500 0007 1 x T 26/58 W 2,3
175 218 17500 0010 2 x T 26/18 W 1,3
175 236 17500 0013 2 x T 26/36 W 2,5
175 258 17500 0016 2 x T 26/58 W 3,5
with electronic ballast
175 118 EVG 17500 0019 1 x T 26/18 W 0,8
175 136 EVG 17500 0020 1 x T 26/36 W 1,4
175 158 EVG 17500 0021 1 x T 26/58 W 1,6
175 218 EVG 17500 0022 2 x T 26/18 W 1,0
175 236 EVG 17500 0023 2 x T 26/36 W 1,6
175 258 EVG 17500 0024 2 x T 26/58 W 1,7
1) Uncomp.; article nos. for comp. see price list
2) Weights without packing material
3) With extention ring 1681/38
With cable entries for IN-OUT wiring as
standard
The variable cable entries allows for an easy adaption
to suit all local structural conditions,
thus eliminating the classic through wiring with
single end IN-OUT wiring. All cable entries are
knock-outs.
Bitte Subject beachten to technical Sie diechanges, Hinweise imisprints Technischen and errors. Anhang!
100
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.