Load Catalogue (PDF, 58 MB) - Schuch

More efficient
with new mirror optics!
Asymmetrical Plane Surface Floodlight
for Lamps up to 1000W
Series 7573...
Applications:
Car parks, stockyards, building sites, illumination
of buildings, bridges, sports
fields, etc.
Design:
Housing: Silumin sheet, powder coated
in light grey (RAL 7035), built-in control
gear, wired ready for installation, with integrated
venting system.
Mounting bracket: Infinitely adjustable
Glass: Tempered safety glass without
frame, hinged, and with EPDM gasket.
Central locking system: Operated by a
5mm Allen key. Hinges on the opposite
side.
Reflector: Optimized high anodized mirror
finish pure aluminium
Connection: 3 pole terminal block up to
4,0 mm².
Cable entry: 1 cable gland M20 x 1.5
Mounting:
• Standing or hanging (wall, ceiling,
ground or pole mounting) using mounting
stirrup with 3 holes
• Direct mounting on Ø 60mm or Ø
76mm poles, or on 2 up to 4 arm
post top adapters with carriers Ø
60mm and fixed with pipe clamps.
NEW
SCHUCH Quality - your advantage:
• sturdy, plane surface floodlight for a reliable long-time application
• extremely compact design, complete with the whole electrical kit, wired ready for installation
• Original SCHUCH central locking system
• high quality polyester resin coating, especially suited for outdoor applications (excellent
UV-resistance, weather-proof and colour stability).
• with special pressure compensation system to avoid internal condensation
• highly effective, light technically optimized mirror system
• precise light control with an excellent glare limitation and minimized light scattering
• quick and easy lamp replacement due to central locking system
• universal mounting, also for multiple lamp arrangements
7573/... LED/A
LED
IP65
LPH
6-12m
Windload-
A = 0,05m 2
Swivel range 180° (infinitely adjustable)
7573/6403 LED
Electrical design:
LED: 64 highpower LED, 4,000K, R a 70, Lebensdauer L 80 B 10 > 50.000h
Lens optic: Asymmetric light characteristic
ECG: 220 – 240V, 50 to 60Hz, start-up peak 80A/50%-150µs, overvoltage protection
4kV, excess temperature, overload and short-circuit protection, temperature
monitoring of the LED modules
Connection terminal: 3 poles up to 4mm² (4-pole version LR).
Output reduction:
With control phase (LR): For reducing the luminous flux to 50%.
Control lead (LST) required. Switching via control phase
(LST = 230V: 100%; LST = 0V: 50%)
Without control phase (LA): Autonomous dimming by means of an integrated
time-setting element. Reduced operation: 50% from 22.00 p.m. to 4.00 a.m.
Uniform luminous flux function (CL): Luminous flux is kept uniform over the whole
life of operation of the LED
Ambient temperature: -30°C up to +30°C
Advantages of the LED version:
• pole distances up to 36m (LPH 8m) with an illumination of an industrial road acc. to DIN EN 12464-2,
complying with the standards.
• additional eneregy saving up to 60% by output reduction. Total energy saving up to 72% (version... LR)
• asymmetrical light distribution
• absolutely equal illumination by the “Multi-Layer” principle i.e. every individual LED illuminates
the total area, overlapping of the light distribution curves of the individual LED
• no decrease of luminous flux during the whole life of operation of the LED (version... CL LR).
More energy and cost savings are achievable by the omission of the generally usual “oversizing”
in new project plannings.
• ECG with high over-voltage protection especially for application in outdoor areas
• fail-safe due to overheating, overload and short circuit protection, temperature monitoring of
the LED modules
• life of operation of the LED B 10 L 80 > 50.000h
Type Article no. Luminous Power/ luminous Weight
flux consumption efficacy ca. kg 6)
lm W lm/W
7573/6403 LED/A 75733 0033 136 12.000 88 13,3
7573/6403 LED/A LR 1) 75733 0034 136/61 2) 12.000 88 13,4
7573/6403 LED/A CL LR 1) 3) 75733 0035 109 4) -136 5) /49-61 2) 9.600 88 13,4
1) With output reduction device
2) Output reduced operation
3) With constant luminous flux function
4) Initial value
5) End of operating life
6) Weights without packing material
Bitte Subject beachten to technical Sie diechanges, Hinweise imisprints Technischen and errors. Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
242
29.10.2013