Load Catalogue (PDF, 58 MB) - Schuch

Reflector Light Fittings
for high ambient temperatures up to 60°C
Series 3019 - 3026...
Application:
Rooms with high ambient temperatures,
recycling depots, sorting halls, assembly
workshops etc.
Design:
Upper section: Control gear enclosure,
ready wired for connection, encased by
powder coated perforated sheet steel
(RAL 9006 white aluminium).
Reflector: High anodized pure aluminium.
Glass: Hinged, detachable toughened
safety glass window complete with retaining
frame, on request.
Electrical connection: Using plug at the
upper section of the light fitting. A matching
coupler is supplied as part of the
package. Opening or dismantling the
light fitting is not necessary.
Mounting system: Eye bolt with internal
Ø of 15mm.
Ambient temperature: Max. +60°C
Note:
1. The light fitting series for metal halide lamps
HIE≥250W may only be operated without
a safety glass when using lamps that are
approved for open fittings (e.g. Osram,
HQI-EP …/D or Philips HPI-Plus …-P).
2. In cases where the lighting installation is
covered by DIN VDE 0108, the light fitting
must be secured by a second eyebolt (supplied
on request). In these cases we would recommend
to buy the light fittings with low noice
control gears and ignitors.
Series 3019/…
3019… H60
with facet reflector
HME
HIE
HIT
3019/400
HSE
HST
reflector
withglass
IP50
Type Article no. 1) Lamps Weight
W ca. kg 7)
wide beam for high pressure discharge lamps/socket E40
3019/250 H60 30102 0101 1 x HME 250 6) 4,8
3019/400 H60 30102 0105 1 x HME 400 6) 6,1
3019/250 HI/HS H60 3) 30102 0103 1 x HIT 5) /HIE/HST/HSE 6,2 250
3019/400 HI H60 3) 30102 0107 1 x HIT 5) /HIE 400 2) 4) 7,7
3019/400 HS H60 3) 30102 0109 1 x HST/HSE 400 7,9
1) Uncomp., article no. for comp. see price list
2) If metal halide lamp to be used is suitable
for operating with HS ballast, please select
HS light fitting for higher luminous flux
3) In case of the use of ignitor with timer please
contact us.
4) For OSRAM HQI-E 400D, HQI-E/P 400D,
IP20
Philips HPI Plus 400 BU or equivalent.
5) Only HIT lamps, suitable for vertical operation
with the socket upwards, are allowed.
6) Attention: HME/mv lamps will be phased out
in EU in April 2015
7) Weights without packing material.
Series 3025/26/…
3025/3026… H60
with plain reflector
HME HIE HSE
3026/250
IP20
withglass
IP50
Type Article no. 1) Lamps Weight
W ca. kg 7)
narrow beam for high pressure discharge lamps/socket E40
3025/250 H60 30201 0001 1 x HME 250 6) 4,6
3026/400 H60 30201 0005 1 x HME 400 6) 6,2
3025/250 HI/HS H60 3) 30201 0003 1 x HIE/HSE 250 6,0
3026/400 HI H60 3) 30201 0007 1 x HIE 400 2) 4) 7,8
3026/400 HS H60 3) 30201 0009 1 x HSE 400 8,0
1) - 7) see series 3019... H60
reflector
Industrial Industrieleuchten Light Fittings
!
Further Series / Versions
– safety glass complete with retaining frame (hingeable
and detachable)
– with slightly structured safety glass
– with wire guard
D [mm] H [mm]
3025 465 512
Series
3026 565 582
Accessories / Spare Parts
Type Article no.
safety glass window
for
SG 2 90244 0002 3019, 3025
safety glass window
for
SG 3 90244 0003 3026
spare reflector (faceted structure) for
BREF 2 F 90240 9006 3019
spare reflector (plain)
for
TREF 2 90241 9000 3025
spare reflector (plain)
for
TREF 3 90241 9001 3026
Subject Bitte beachten to technical Sie diechanges, Hinweise misprints im Technischen and errors. Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
151
30.08.2012