Load Catalogue (PDF, 58 MB) - Schuch

Reflector Light Fittings
Series 3169 - 3189..., 3038/3048...
Application:
Industrial halls, warehouses, workshops
with high ceilings, maintenance and assembly
shops, etc.
Design:
Upper section: Ventilated sheet steel,
painted in light grey (RAL 7035), complete
with control gear and ready wired
for installation.
Reflector: Pure alumium, axially symmetrical,
surface finished with prismatic
facet structure or smooth (series
3175/76... and 3038/48...).
Safety glass: With retaining frame, hingeable
and detachable
(required in case of HI and CE lamp types
only; if lamps w/o burst protection are
applied - please order separately.
Connection terminal: 3 poles up to 2.5mm².
Electrical connection: In upper housing
with hinged section. Mains terminal
block 3 x 4mm² with wire protection.
Cable entry: 2 grommets for through wiring
for cables up to 17mm Ø. PVC insulated
cables may be used. (For
30378-3038 use silicone insulated cable.)
Mounting: By means of an eye bolt with
18mm inner dia.
Ambient temperature: Up to +30°C.
Note:
1. The light fitting series for metal halide lamps
HIE≥250 W may only be operated without
a safety glass when using lamps that are
approved for open fittings (e.g. OSRAM, HQI-
EP …/D or PHILIPS HPI-Plus …-P).
NEW
Technical data:
3169/3189...CE EVG
Control gear: Electronic
Mains voltage: 220 – 240V/AC
3169/3189 ...DIM D
Control gear: Electronic
Mains voltage: 220 – 240V/AC
Range of dimming: 100% to 50%
(lamp output)
Interface: DALI
2. In cases where the lighting installation is
covered by DIN VDE 0108, the light fitting
must be secured by a second eyebolt (supplied
on request).
3. For applications under high noise emission
requirements please order the light fittings
with control gears and ignitors or ECG resp.of
low noise level.
SCHUCH Quality - your advantage:
• accurately manufactured quality product for long-term application
• economical without compromise
– facet reflector optimized for an application of tubular high pressure lamps of high light output. In
comparison with an hpmv lamp
– up to 33% less light fittings i.e. lower energy costs and less capital investment when applying an HIT
lamp of the same luminous intensity
– up to 50% less light fittings i.e. lower energy costs and less capital investment when applying an HCI-
TT lamp (ceramic burner lamp) at the same luminous intensity
• easy to install and to maintain
– simple and quick connection thanks to a spacious upper section that can laterally be opened for reaching
the connection chamber with all electrical components
– lamp replacement through hingeable safety glass pane without any tools
• flexible with regard to the ingress protection by glass covers in IP54 or IP 65 versions
Advantages of the version for energy saving ceramic burner lamps PHILIPS MASTER
COLOUR ELITE compared to quartz burner lamp systems:
• up to 25% energy cost saving through reduced connection power
• further 40% energy cost saving in the dimming operation with 50% luminous flux
• 66% maintenance cost saving due to three times longer period of use of the ELITE lamp
• additionally improved operating efficiency of the luminaire due to compact burner shape and mechanically
precize lampholder system
Eneregy cost saving
by application of the facet reflector with quarz or ceramic burner lamps
Energy costs in %
(dim light operation)
Easy and quick connection by spacious upper
section to be opened laterally.
Subject Bitte beachten to technical Sie diechanges, Hinweise misprints im Technischen and errors. Anhang!
134 03.09.2012
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.