Load Catalogue (PDF, 58 MB) - Schuch

NEW
175... RLED
for LED Retrofit Lamps with short-circuit starter
Design:
As standard version but:
Starter: Delivery without jumper (belongs
to delivery of the lamp).
IP65
Waterproof lampholder: Special type
with snap function. (see „Note“)
Ambient temperature: -30°C bis +30°C
Advantages of the RLED-version:
Note:
Application of VDE tested LED Retrofit lamps with
short circuit starter only identified with VDE registration
no. or with VDE symbol.
Ingress protection: IP65 with adequate lamps.
• specificlightcontrolbysettingthebeamdirectioninstepsof30°viathelampholder
• triplesafetyastoapplications
– VDE certified system (short circuit starter)
– VDE certified light fitting
– VDE certified LED retrofit lamp
The fittings are suitable for retrofit lamps with an
outer diameter of 26 mm (also at the end of the
retrofit lamps). If retrofit-systems with tightened
end sections or with enhanced diameters are used
additional accessory 1681/38 and 170/26 is necessary
(please see accessory / spare parts).
R LED
Type Article no. Lamps¹ ) Length Weight
(m) approx.kg
1751/12RLED 175030303 1 x LED-Retrofit 1,20 1,8
1751/15RLED 175030305 1 x LED-Retrofit 1,50 2,3
1752/12RLED 175030304 2 x LED-Retrofit 1,20 2,5
1752/15RLED 175030306 2 x LED-Retrofit 1,50 3,5
1) Application of LED lamps with VDE registration
no. or with VDE symbol only!
1568 -175 .15
1268 -175 .12
1100 -175 .15
800 - 175 .12
Dustproof/Waterproof
Feuchtraumleuchten
Light Fittings
Bitte Subject beachten to technical Sie diechanges, Hinweise imisprints Technischen and errors. Anhang!
TechnischeÄnderungen,DruckfehlerundIrrtümervorbehalten.
101
08.05.2013