Load Catalogue (PDF, 58 MB) - Schuch

541/3001/2501 LED/.
direct lighting
IP54
LPH
3-5m
Wind
load area
A = 0,15m 2
Application:
541/3001 LED/R:
Small squares, public parks, pedestrian
areas, low traffic areas etc.
541/2501 LED/A:
Residential areas, residential and side
roads, food paths and cycle tracks, etc.
Design:
As standard design, but:
With longer glass cylinder.
LED: High-power LED module with heat
sink and overheating protection, 30 or
25 high-power LED, 1W, colour temperature
4,000K.
Reflector: Directional light with precise
balanced combination of optical lens system,
high-polished reflectors and clear
glass symmetrical (R) or asymmetrical (A).
Insulation class: II
LR (output reduction):
For reducing the luminous flux to 50% in
times of low traffic density. A control
lead (LST) is required for this purpose.
This cycling procedure happens via the
control phase (LST = 230V: 100%;
LST = OV: 50%)
CL ( constant luminous flux function):
Luminous flux is kept on a constant level
over the whole life of the light fitting.
Options:
Please see “Further Series/Equipments”
Advantages of LED-version:
• pole light point distances up to 31m (LPH 5m), with lighting which conforms to standards, illumination
class S5 (version LED/A)
• up to 66%/50% energy savings pro km and year in comparison with an 80W mercury vapour /
50W sodium vapour lamp fluorescent lamp (version LED/A)
NEW • additional eneregy saving up to 60% by output reduction. Total energy saving up to 89%
(version LED/. LR)
• optimal light distribution via lens system and high-polished reflectors
NEW • no decrease of luminous flux during the whole life of operation of the LED (version ... CL LR).
More energy and cost savings are achieved by the omission of the generally usual “oversizing”
in new project plannings
• ECG with high over-voltage protection especially for application in outdoor areas
• fail-safe due to overheating and overload protection
• future orientated by easily interchangeable gear-tray system (modular concept)
541/3001 LED/R
541/2501 LED/A
LED
Type Article no. Qty. LED Power Weight
W consumption ca. kg 6)
541/2501 LED/A 11541 0083 25 x 1W 38W 7,1
541/2501 LED/A LR 1) 11541 0085 25 x 1W 38/13W 7,1
2)
541/2501 LED/A CL LR 1) 3) 11541 0087 25 x 1W 31 4) -38 5) W/11-13W 2) 7,1
541/3001 LED/R 11541 0084 30 x 1W 47W 7,1
541/3001 LED/R LR 1) 11541 0086 30 x 1W 47/16W 7,1
2)
541/3001 LED/R CL LR 1) 3) 11541 0088 30 x 1W 38 4) -47 5) W/13-16W 2) 7,1
1) With light output reduction device
2) Output reduced operation
3) With constant luminous flux function
4) Initial value
5) End of operating life
6) Weights without packing material
Energy cost savings per km and year
using LED module Series 541/2501 LED/A
in comparison with series 541/551 80W
Note:
The data given for the LED is relevant at the
time of print. Actual data is available upon request.
Changes due to the technical progress
can be found in the internet under
www.schuch.de.
The given values for energy saving are approximate.
These are dependent on the individual
lamps used and the built-in apparatus.
Guaranty claims based on these data are excluded.
energy cost in %
80W HME
25 x 1W LED
light output reduction
to 50%
Bitte Subject beachten to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!
222
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.