Load Catalogue (PDF, 58 MB) - Schuch

Reflector Pendant Light Fittings with
High Degree of Protection IP54 / IP65
Series 3469 - 3489... / 3569 - 3589…
Application:
In humid and dusty factories with rough
environmental conditions such as steel
works, building material factories, and
other heavy industries.
Design:
Upper part: Two-piece cast aluminium
housing, powder-paint finish light grey
(RAL 7035), electrical components
mounted on a compact carrier plate,
wired ready for connection.
Reflector: Pure alumium, axially symmetrical,
surface finished with prismatic
facet pattern or smooth (series
3475/76..., 3575/76... and
3488/3588...).
Safety glass window: With retaining
frame, hingeable and detachable
Cable entry: 1 plastic cable gland and 1
threaded blanking plug M25 x 1, 5.
Through wiring possible on request.
Connecting terminal: 3-pole up to
4mm 2 . PVC insulated cables may be
used.
Mounting: M8 eyebolt.
Ambient temperature: +30°C max.
Options:
Please see “Further series/versions”.
Note:
1. In cases where the lighting installation is
covered by DIN VDE 0108, the light fitting
must be secured by a second eyebolt (supplied
on request).
2. For applications under high noise emission requirements
please order the light fittings with
control gears and ignitors or ECG resp. of low
noise level.
NEW
Technical data:
3469/3489... CE EVG
Control gear: Electronic
Mains voltage: 220 – 240V/AC
SCHUCH Quality - your advantage:
3469/3489 ...DIM D
Control gear: Electronic
Mains voltage: 220 – 240V/AC
Range of dimming: 100% to 50%
(lamp output)
Interface: DALI
• robust design for long life, best suitable for applications in rough environmental conditions
- robust upper section with high quality paint for good corrosion protection
- inherently stable aluminium reflector with 5mm thick safety glass window in a retaining frame
• highly economical
- facet-type reflector optimized for an application of high-performance high pressure lamps of tubular
shape. In comparison with an hpmv lamp:
- up to 33% less light fittings i.e. lower energy costs and less capital investment when applying an
HIT lamp of the same luminous intensity
- up to 50% less light fittings i.e. lower energy costs and less capital investment when applying an
HCI-TT lamp (ceramic burner lamp) with the same luminous intensity
• best suited for installation and maintenance purpose
- direct accessible connection chamber containing all electrical components with easily opened hinged
cover
- if necessary, easy replaceable compact gear carrier (e.g. for conversion to suit other lamp types)
- reflector easily installed with a triple bolt/keyhole connection
- hinged safety glass allows tool-free lamp replacement
Advantages of the version for energie saving ceramic burner lamps PHILIPS MASTER
COLOUR ELITE compared to quartz burner lamp systems:
• up to 25% energy cost saving by reduced connection power
• further 40% energy cost saving in the dimming operation with 50% luminous flux
• 66% maintenance cost saving by three times longer period of application of the ELITE lamp
• additionally improved operating efficiency of the luminaire by compact burner shape and mechanically
precise lampholder system
Industrial Industrieleuchten Light Fittings
Energy cost saving
by application of the facet reflector with quarz or ceramic burner lamps
Energy costs in %
Easy to open cover for friendly assembly and
maintenance. Complete exchange of gear
tray if required.
3469
HME 250
3469
HQI-T250/D
(or equal)
3469
HCI-TT 250
(or equal)
3469
CDM-T 210
ELITE
3469
CDM-T 210
ELITE
(dim light operation)
Subject Bitte beachten to technical Sie diechanges, Hinweise misprints im Technischen and errors. Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
143 03.09.2012