Load Catalogue (PDF, 58 MB) - Schuch

NEW
Compound ceiling mount and wall mount Light
Fitting with Highpower LED
Series 3611/… LED
3611/201 LED RW
3611/... LED
Application:
Humid, wet and dusty locations in the
commerce and industry, areas with rough
conditions of operation, constricted
space, almost inaccessible locations like
for instance diggers, giant equipment,
conveyer belts, runways, cable channels,
stair towers, walkable low temperature
booths, wind power stations, purpose of
signalization (with coloured LED), escape
route illumination/ signification etc.
Design:
Housing: Die-cast aluminium, painted in
white, all operating components located
inside the housing and wired ready for
connection.
Diffuser: PMMA satined or opalescent
white PC (W), silicone gasket.
ECG: 230V AC/DC. Overload and short
circuit protection.
LED: Highpower LED 6,500K, R a > 70.
Connection terminal: 3-/4 poles.
Cable entry: 1 plug M20 at the front
side.
Mounting: 2 fixing points. Rubber gaskets
and washers inside the luminaire.
Ambient temperatures: -20°C up to +30°C
… T40/H30
-40°C up to +30°C
… T40/H50
-40°C up to +50°C
Options:
– PC glass (satined)
– cable looping system on one side
– ECG for safety extra-low voltage (24V
DC)
– sturdy version for areas subject to vibrations
and shakings (RF)
Advantages of the LED version:
• up to 87% energy saving in comparison with a 60W incandescent lamp or 57% in comparison
with an 8W fluorescent lamp
• applicable in a wide temperature range from -40°C up to +50°C
(type T40/H50)
• instant light with max. luminous flux even at very low temperatures
(safety lighting)
• best suitable in case of a high frequency of operations (e.g. in combination with motion
detectors)
• fail-safe due to overload and short circuit protection
• with coloured LED the fitting is best suitable for signalisation purpose
• almost maintenance-free operation due to long service life of the LED
• lamp replacement not required
3611/... LED
Type Article no. Luminous Power/ luminous Weight
flux consumption efficacy ca. kg 3)
lm W lm/W
PMMA cover (satined)
3611/201 LED 36110 0001 4 190 48 0,9
3611/401 LED 36110 0002 6 430 72 0,9
3611/601 LED 36110 0003 8 620 78 0,9
3611/603 LED 36110 0004 16 1.100 69 0,9
... for wide temperature ranges
3611/601 LED T40/H50 2) 36110 0105 8 620 78 1,0
... with raised luminous flux
3611/603 LED T40/H30 2) 36110 0106 16 1.100 69 1,0
... escape route light fitting 1)
3611/201 LED RW 36110 0011 4 190 48 0,9
PC glass cover (opalescent white), pictogram/escape sign light fitting
3611/201 W LED 36110 0051 4 100 25 0,9
1) Basically supplied w/o pictogram 2) No DC operation 3) weights without packing material
LED
IP65
Energy cost savings
by use of type 3611 601 LED
in comparison with a similar light fitting with a 60W incand. lamp
Energy costs in %
Type 3611/... with pictogram 220/110/35
Incand. 1 x 60W lamp
3611/601 LED LED
Bitte Subject beachten to technical Sie diechanges, Hinweise imisprints Technischen and errors. Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
188
29.10.2013