Load Catalogue (PDF, 58 MB) - Schuch

Modern Polyester Outdoor Light Fitting
With Multi-purpose Mounting System
Series 46... / 46AL...
Applications:
Service roads, through and collecting
roads, walkways, cycle ways, traffic-calmed
areas, small squares, bridges, industrial
plants, car parks...
Design:
Housing: Glass fibre reinforced polyester
resin with UV resistant coating or diecast
aluminium, light grey powdercoated
(RAL 7035), integrated pressure
compensation system.
Diffuser: Impact and temperature resistant
acrylic glass (PMMA), CPO-types polycarbonate
(PC), with inserted UV
stabilized profile gasket (EPDM), hingeable
and detachable. .
Fasteners: Stainless steel
Mirror reflector: Optimized system made
from surface refined purest aluminium.
Gear tray: Glass fibre reinforced polyester
carrying all electrical components, removable
without any tools. Plug/lamp holder
connection to mains connection terminal.
Cable retainer for connection conductor.
Mounting system: Universal pole mounting
system made from diecast aluminium for
pole top and side entry mounting. Pole end
Ø of 60mm and 76mm (inclination: 10°).
Supporting section: 42Ø x 100mm or 60 x
100mm.
SCHUCH Quality – your advantage:
• Product of an excellent quality, well known on the market thanks to its
reliable long-term application
- durable housing made from glass fibre reinforced polyester resin with UV resistant
coating, special colours available
- impact resistant, hinged PMMA cover, hinges covered and located inside the pole mounting section
that is made from diecast alumin (no springs)
- UV resistant profile gasket deep-set in the glass cover, thus, protected against climatic influences
- locking clamp made from stainless steel
- stable diecast aluminium pole mounting system
- gear section and lamp compartment are covered by the glass cover; the closed gasket system ensures a
durable IP protection. It steadily avoids vermin penetration and, thus, service intervals are getting longer
- integrated venting system that ensures a definite breathing procedure to avoid
any formation of condensation water
- permanent insulation class II protection thanks to a polyester gear tray and
polyester housing (any regular security check not required)
permanent
SKII - safety
Gear tray carrying all electrical components,
removable without any tools.
• universal application thanks to a flexible pole mounting system (pole end Ø up to 76mm)
- for a pole arm end Ø of 42 and 60 mm
- for a post top end Ø of 60 and 76 mm
- no additional adaptors required
!• extremely easy to install and to maintain, no tools required for maintenance
- turn able pole mounting system for quick post top or side entry mounting – no tools required
- for direct access to the lamp compartment you just swing down und unhinge the glass bowl (onehand
operation/no tools required).
Result: Quick electrical connection/ (plug-type system); quick lamp replacement;
- removable (without any tools) compact electro kit with all electrical parts including lampholder. Thus,
any conversion to other lamp types, lamp outputs or to other versions is easily possible.
• very economical thanks to a most effective light distribution system
- suitable for modern, energy-efficient lamp control gear systems
- highly efficient mirror reflector system, light technically optimized for large pole distances
- excellent glare limitation (class KB1)
• energy efficient and non-polluting
- design meeting the European standards 2005/32 EG (EUP standard)
- insect friendly due to low profile glass bowl when applying CosmoPolis or other sodium vapour
lamps.
Optimized optics for pole spacing of up to 50m
- maximum pole spacing acc. DIN EN 13201
- no interfering light emission
- optimized illumination of walk- and bikeway in the rear area
6,00m
ca. 50m 6,00m
Bitte Subject beachten to technical Sie diechanges, Hinweise imisprints Technischen and errors. Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
198