Load Catalogue (PDF, 58 MB) - Schuch

NEW
7572/... LED/A
LED
IP65
LPH
6m
Windload-
A = 0,05m 2
Application:
Car parks, loading areas, rear sides of a
building, fence arrangements, public places,
doorways etc., as well as safety and
observation light fitting if the light shall
immediately be available with its full output
(also in combination with motion detectors).
7572/3203 LED/A
Electrical design:
LED: 32 highpower LED, 4,000K, R a 70, Lebensdauer L 80 B 10 > 50.000h
Lens optic: Asymmetric light characteristic
ECG: 220 – 240V, 50 to 60Hz, start-up peak 80A/50%-150µs, overvoltage protection
4kV, excess temperature, overload and short-circuit protection, temperature
monitoring of the LED modules
Connection terminal: 3 poles up to 4mm² (4-pole version LR).
Output reduction:
With control phase (LR): For reducing the luminous flux to 50%.
Control lead (LST) required. Switching via control phase
(LST = 230V: 100%; LST = 0V: 50%)
Without control phase (LA): Autonomous dimming by means of an integrated
time-setting element. Reduced operation: 50% from 22.00 p.m. to 4.00 a.m.
Uniform luminous flux function (CL): Luminous flux is kept uniform over the whole
life of operation of the LED
Ambient temperature: -30°C up to +30°C
Advantages of the LED version:
• up to 45% energy saving in comparison with a 125W HME (mv) lampholder
• additional energy saving of 60% by output reduction (LR)
• more energy saving up to 20% but no decrease of luminous flux over the whole life of operation
of the LED due to the uniform luminous flux function (CL)
• fail-safe due to over-voltage, overload, short-circuit and excess temperature protection
• eco-friendly – no light emission into the upper half-space „Dark-Sky Requirements“ are fulfilled
• life of operation of the LED B10L80 > 50.000h
Type Article no. Luminous Power/ luminous Weight
flux consumption efficacy ca. kg 6)
lm W lm/W
7572/3203 LED/A 75721 0004 70 6.400 91 4,6
7572/3203 LED/A LR 1) 75721 0014 70/32 2) 6.400 91 4,6
7572/3203 LED/A CL LR 1) 3) 75721 0024 56 4) -70 5) /26-32 2) 5.100 91 4,6
1) With output reduction device
2) Output reduced operation
3) With constant luminous flux function
4) Initial value
5) End of operating life
6) Weights without packing material
Possible mounting methods:
Mounting using stirrup
Wall mounting
Direct pole mounting with 7571/1 M
Floor mounting
Outdoor Light fittings
Accessories / Spare Parts
Type
Article no.
7502 75001 9002 spare glass pane
7502 TL 75001 9007 spare glass pane (partially painted) for central locking system
2561 25610 9000 plastic cable gland M20 x 1,5
7571/1 M 75739 9003 pole cross arm with accessories for mounting to poles of Ø 76mm
Bitte Technical beachten changes, Siemisprints die Hinweise and errors im Technischen excepted. Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
241
29.10.2013