Load Catalogue (PDF, 58 MB) - Schuch

Polyester Ballast Housings up to 400W
Series 10150...
Application: Spotlights series 7601, 7557...
Floodlight series 7560, 7562...
Design:
Housing: Glass fibre reinforced polyester
resin with built-in ballast, capacitor and,
if required, ignitors. Standard version
with 2 plastic cable glands M20 x 1.5.
Mounting: 2 bolts max. Ø 6mm (not included
in the scope of delivery).
The thrust and sealing washers supplied
shall be used for sealing.
Note:
In the case of ballast housings with builtin
ignitor, to insure ignition, the cable
length between lamp and ignitor must
not exceed 1m.
10150...
IP55
for 400 W lamps max.
Type Article no. 1) Weight
ca. kg 4)
Type Article no. 1) Weight
ca. kg 4)
without ignitor, for high pressure lamps
10150/250 k 3) 10150 0004 3,9
10150/400 k 3) 10150 0006 4,9
10150/250 HI/HS k 2) 10150 0010 4,9
10150/400 HI k 2) 10150 0014 4,9
10150/100 HS k 2) 10150 0022 2,9
10150/150 HS k 2) 10150 0020 3,9
10150/400 HS k 2) 10150 0018 6,0
with ignitor, for high pressure lamps
10150/250 HI/HS ZG k 2) 10150 0008 5,0
10150/400 HI ZG k 2) 10150 0012 5,0
10150/400 HS ZG k 2) 10150 0016 6,1
1) Comp., article nos. for uncomp see price list
2) In case of the use of ignitor with timer please contact us.
3) Attention: HME (mv) lamps will be outphased in EU in April
2015
4) Weights without packing material
Sheet Steel Ballast Housings up to 2000W
Series 1032…
Application: Spotlight series 7601…
Floodlight series 7562/7564… and
Plane surface projector 7574/7575…
Design:
Housing: Sheet steel, powder coated
light grey (RAL 7032), with built-in ballast,
capacitor, and, if required, ignitors.
Standard version with 2 cable glands
M32 x 1,5. Handle detachable.
Mounting: 4 holes 10mm Ø on rear of
housing.
Note:
In the case of ballast housings with builtin
ignitor, to insure ignition, the cable
length between lamp and ignitor must
not exceed 1m.
1032…
IP66
Type Article no. 1) Weight
ca. kg 7)
Type Article no. 1) Weight
ca. kg 7)
without ignitor, for high pressure lamps
1032/1000 k 6) 10320 0004 13,4
1032/1000 HI k 10320 0014 18,6
1032/2000 HI 8,8 k 2) 4) 10320 0010 19,6
1032/2000 HI 10,3 k 2) 5) 10320 0012 16,3
1032/600 HS k 10320 0018 13,1
1032/1000 HS k 10320 0016 18,6
with ignitor, for high pressure lamps
1032/1000 HI ZG k 3) 10320 0006 18,9
1032/600 HS ZG k 3) 10320 0020 13,4
1032/1000 HS ZG k 3) 10320 0008 18,9
1) Comp.; article nos. for uncomp. version see price list
2) Mains voltage 400 V
3) In case of the use of ignitor with timer please contact us.
4) For lamps of colour reproduction level 2
5) For lamps of colour reproduction level 1
6) Attention: HME (mv) lamps will be outphased in EU in April
2015
7) Weights without packing material
Bitte Subject beachten to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!
256
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.