Load Catalogue (PDF, 58 MB) - Schuch

Sheet Steel Light Fitting of Low Profile Design
for Ceiling Mounting and Ceiling Recessed Installation
Series 191/192...
Application:
Industrial, tradesmen’s and commercial
facilities with extremeconditions, aggressive
environments (e.g. oil, grease) or
high mechanical exposure, paint shops
and spray booths (non-hazardous areas)
etc.
Design:
Housing: sheet steel, traffic white (RAL
9016), powder-coated.
Glass: hinged, frameless tempered safety
glass.
Reflector: Surface refined purest aluminium.
Central locking: operated by a 5mm
Allen key, hinges on the opposite side.
Electrical connection: 3-pole terminal
block (max 2,5mm²).
Cable entries: 3 x M25 x 1.5 (1 gland
and 2 plugs), cable looping on 1 side is
possible.
Mounting: 4 angle brackets (included) or
separate frame for recessed installation
(see series ... EB).
Note:
Ask for stainless steel versions in
case of permanent humidity or corrosive atmosphere
presence.
Special versions available for extreme conditions
like e.g. in humit environments with just short
working periods.
Suitable for dry maintenance pits only. In case of
wall recessing please protect from storm water
from above.
SCHUCH quality - Your advantage:
• robust and high chemical resistant design for a long-life in rough industrial conditions
– housing made of powder-coated sheet steel or stainless steel
– frameless safety glass or framed polycarbonate glass
– sturdy central-locking system and high quality stainless steel hinges
• easy to mount and maintain
– Original SCHUCH central locking-system with hinged safety glass for easy lamp replacement
– easily accessible connection compartment under hinged reflector
– fast and cost-saving through wiring by looping system at one end of the housing (on request)
• high operating efficiency due to optimized light-technical anodized pure aluminium mirror-finish reflector
• flexible and suitable for a wide range of applications in various environmental conditions
– suitable for surface or flush mounting in suspended or insulated ceilings as well as recesses in concrete
ceilings.
– separate frame for recessed installation and swivel arm mounting system for retrofitting (buildingblock
system), thus offering high application flexibility and economic stock-keeping.
– versions for use in blasting locations or cabins, for use in the food industry, for use in potentially explosive
atmospheres (series e191/192... see catalogue section “Explosion-proof light fittings”), and
other modified versions (see “Further Series / Versions”).
Dustproof/Waterproof
Feuchtraumleuchten
Light Fittings
191...
192...
191 1..
191...
surface and flush mounting light fittings
191 1..
191 2..
T 26
Type Article no. Lamps Weight
W ca. kg 2)
symmetrical mirror-type reflector
191 118 19101 0001 1) 1 x T 26/18 W 8,8
191 218 19101 0003 1) 2 x T 26/18 W 9,4
191 136 19101 0005 1) 1 x T 26/36 W 16,0
191 236 19101 0007 1) 2 x T 26/36 W 16,8
191 158 19101 0009 1) 1 x T 26/58 W 19,4
191 258 19101 0011 1) 2 x T 26/58 W 20,6
asymmetrical mirror-type reflector
IP65
191 236 SA 19101 0071 1) 2 x T 26/36 W 16,8
191 258 SA 19101 0073 1) 2 x T 26/58 W 20,6
191 2..
191 2.. SA
Looping the cable on one side:
All light fittings of series 191/192... have got
2 cable entries M25 x 1.5 on the connection side
for a cost-saving cable looping instead of a
through wiring system.
(Preparation of a 5-pole version at additional
charge)
191 2.. SA
symmetrical mirror-type reflector
191 118 EVG 19101 0013 1 x T 26/18 W 8,5
191 218 EVG 19101 0014 2 x T 26/18 W 8,6
191 136 EVG 19101 0015 1 x T 26/36 W 15,5
191 236 EVG 19101 0016 2 x T 26/36 W 15,6
191 158 EVG 19101 0017 1 x T 26/58 W 18,5
191 258 EVG 19101 0018 2 x T 26/58 W 18,6
asymmetrical mirror-type reflector
191 236 SA EVG 19101 0076 2 x T 26/36 W 15,6
191 258 SA EVG 19101 0077 2 x T 26/58 W 18,6
1) Uncomp.; article no. for comp. see price list 2) Weights without packing material
Bitte Subject beachten to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
109