Load Catalogue (PDF, 58 MB) - Schuch

3070…
high bay light fittings
HME
HIT-CE
HIE
HIT
HIT-DE HST-DE
3070/..
3070/.. TS
HSE
HST
3070/315 CE EVG
NEW
Type Article no. Lamps Weight
W ca. kg 9)
for high pressure discharge lamps, lamp holder E40
3070/250 30700 0001 1) 1 x HME 250 2) 13,2
3070/400 30700 0003 1) 1 x HME 400 2) 14,8
3070/250 HI/HS 5) 30700 0005 1) 1 x HIE/HSE/HIT/HST 250 15,1
3070/400 HI 5) 30700 0007 1) 1 x HIT/HIE 400 3) 16,7
3070/400 HS 5) 30700 0011 1) 1 x HST/HSE 400 16,7
1 x HIT/HIE 400 4) 16,7
for ceramic burner lamps, lamp holder E40 or PGZ18
3070/250 CE 7) 8) 30700 0053 1) 1 x HIT-CE 250 15,1
3070/210 CE EVG 8) 30700 0055 1 x HIT-CE Elite 13,8
210 6)
3070/210 CE DIM D 8) 30700 0056 1 x HIT-CE Elite 210 6) 13,8
3070/315 CE EVG 8) 30700 0057 1 x HIT-CE Elite 315 6) 14,7
for high pressure discharge lamps, lamp holder Fc2
3070/250 HI-TS 5) 30700 0013 1) 1 x HIT-DE 250 15,1
3070/400 HI-TS 5) 30700 0015 1) 1 x HIT-DE 400 3) 16,7
3070/250 HS-TS 5) 30700 0017 1) 1 x HST-DE 250 15,1
3070/400 HS-TS 5) 30700 0019 1) 1 x HST-DE 400 16,7
1) Uncomp., article no. for comp. see price list.
2) Attention: HME/mv lamps will be phased out
in EU in April 2015
3) If metal halide lamp to be used is suitable
for operating with HS ballast please select
HS light fitting for higher luminous flux
4) HI lamps with high luminous flux which are
suitable for operating with HS (sv) choke
(such as OSRAM HQI-E 400D, HQI-E/P 400/D,
IP65
PHILIPS HPI Plus 400 Bu) or equal.
5) In case of use of ignitors with timer (please
contact us)
6) PHILIPS Master Colour CDM-T ELITE
7) With timer ignitor
8) For lamps without burst protection
9) Weights without packing material.
3070… FF
for locations with increased fire risk
IP65
HME HIE
HIT
HSE
HST
HIT-DE HST-DE
3070…FF
Application:
Halls with increased fire risk due to deposits
of combustible dusts and fibres
Type Article no. 1) Lamps Weight
W ca. kg 4)
for high pressure discharge lamps, lamp holder E40
3070/250 FF 30702 0001 1 x HME 250 3) 13,2
3070/250 HI/HS FF 2) 30702 0003 1 x HIE/HSE/HIT/HST 15,1
250
for high pressure discharge lamps, lamp holder Fc2
3070/250 HI-TS FF 2) 30702 0005 1 x HIT-DE 250 15,1
3070/250 HS-TS FF 2) 30702 0007 1 x HST-DE 250 15,1
1) Uncomp., article no. for comp. see price list
2) In case of use of ignitors with timer (please
contact us)
e.g. as stipulated in VDE0100 Part 482
3) Attention: HME/mv lamps will be phased out
in EU in April 2015
4) Weights without packing material.
Subject Bitte beachten to technical Sie die changes, Hinweise misprints im Technischen and errors. Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
156