Load Catalogue (PDF, 58 MB) - Schuch

541 1701 LED/.
with highpower LED
IP54
LPH
3-5m
Wind
load area
A = 0,15m 2
Application:
541/1701 LED/R:
Promenades, public parks, pedestrian
areas etc.
541/1701 LED/B:
Residential areas, residential and side
roads, low traffic areas, footpaths and
cycle tracks etc.
Design:
As standard design, but
LED: 17 high power LED, 1W, colour
temperature 4.000K.
Heat sink, overheating protection and
failure protection with individual fusing
of LED.
Light distribution:LED-optic bi-directional
(B) or symmetrical (R) and anodized pure
aluminium ring mirror.
Illustration: Special painting moss-green RAL 6005 (option)
Advantages of LED Series 541/1701 LED/B
• pole distances up to 31m with an illumination of residential streets and walkways, however, complying
with the standards. Illumination class: S5 (version … LED/B)
• up to 73/63% energy saving per km and year in comparison with an 80W hpmv lamp / 50W hpsv
lamp (version … LED/B)
• optimal light distribution via an LED integrated optics (Batwing characteristics)
• absolutely equal illumination through the “Multi-Layer” principle i.e. every individual LED illuminates
the total area, the light curves of the individual LED are overlapping. Any failure of a particular
single LED will not create any dark zones in the road. The uniformity of the illumination is
NEW
kept
• ECG with high over-voltage protection especially for application in outdoor areas
• fail-safe due to overheating and failure protection fusing of each individual LED (no black out in
case of a failure of any single LED)
• eco-friendly, no light pollution in the upper space (“Dark-Sky” requirements are fulfilled)
• future orientated with an easily interchangeable gear-tray system (modular concept)
• optical decorative effect with coloured LED, in upper light emission sector (on request)
541/1701 LED/B
LED
Type Article no. Qty. LED Power Weight
W consumption ca. kg 1)
541/1701 LED/R 11541 0052 17 x 1W 22W 7,1
541/1701 LED/B 11541 0051 17 x 1W 22W 7,1
1) Weights without packing material
Version with asymmetrical Mirror
for larger pole distances.
Version with coloured LED (blue) in the
upper section of light emission.
Energy cost savings
with use of LED type 541/1701 LED
in comparison with series 541/80
Outdoor Außenleuchten Light fittings
Note:
The data given for the LED is relevant at the
time of print. Actual data is available upon request.
Changes due to the technical progress
can be found in the internet under
www.schuch.de.
The given values for energy saving are approximate.
These are dependent on the individual
lamps used and the built-in apparatus.
Guaranty claims based on these data are
excluded.
energy cost in %
80W HME
17 x 1W LED
Bitte Technical beachten changes, Sie misprints die Hinweise and errors im Technischen excepted. Anhang!
221
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.