Load Catalogue (PDF, 58 MB) - Schuch

164... KL LED/. MA
with self-contained battery and automatic self-monitoring
Application:
In humid, wet and dusty locations in
commercial and industrial premises, cold
rooms, walkable cool cabins etc. for
emergency lighting as well as for illuminating
and indicating any escape routes.
Mechanical design:
As standard version but:
Diffuser: Opalescent white (W) PMMA.
IP65
(Pictograms – if required – to be ordered
separately, see accessories).
Reflector: Painted aluminium.
Connection terminal: 4 poles
Connection voltage: 230V, 50Hz
LED: Highpower LED 1W, white 6,500K
Options:
Please see “Further series/equipment”.
Diagram “maintained/stand-by wiring”
Electrical design:
NiCd battery, a constant trickle charge to
the battery ensures readiness of operation
at all times.
Electronic deep discharge protection.
Recharging time:
24 h, acc. to EN 60598-2-22.
Automatic monitoring the emergency
light fitting acc. to EN 62034. 2 coloured
LED on the light fitting indicate the test
results (.../MA).
Modes of operation:
Maintained operation: Switch over to
battery operation in case of mains failure.
Stand-by operation: Emergency lamp
switches on in case of mains failure.
Advantages of LED-version
• up to 71% energy saving in comparison with an 8W fluorescent lamp
Installation: Connect battery conductor
Decommission: Disconnect battery conductor
Stand-by operation: Do not connect L1'
• safety in an emergency , immediate full light output (100% luminous flux) even at low temperatures
• stable luminous flux in the emergency operation independent from the ambient temperature
• outstanding even illumination of the pictogram fulfills EN 1838 and DIN 4844
• reduced battery capacity
• little thermal stress
• low weight
• almost maintenance-free operation due to long operation life of the LED (≥ 50,000h)
• no costs for lamp replacement
LED
Type Article . Qty. LED Operating Flux factor Power
no. W time h about% 1) consumption
maintained operation
164 201 W KL LED/1/MA 16408 0001 2 x 1 W 1 100 4W
164 201 W KL LED/3/MA 16408 0002 2 x 1 W 3 100 4W
1) Ratio effective lamp flux to rated current
Energy cost savings
using LED Series 164... KL
Energy costs in %
71%
Note:
The data given for the LED is relevant at the
time of print. Changes based on technical
advancements see web-site under
www.schuch.de.
The given values for energy savings are approximate.
These are dependent on the individual
lamps used and the built-in
apparatus.
Guarantee claims based on this data are excluded.
164... KL LED ZB
NEW
for central battery systems
LED
Application:
For connection to group or central battery
systems or to an emergency mains for illuminating
and identifying escape routes..
Type Article no. . Qty. LED Power/ Weight
W consumption about kg 1)
white opaque PMMA glass
164 201 W KL LED ZB 16408 0003 2 x 1,0W 4W 100 0,9
164 601 W KL LED ZB 16408 0004 6 x 1,0W 8W 120 0,9
164 603 W KL LED ZB 16408 0005 6 x 2,5W 16W 120 0,9
1) Weights without packing material
IP65
Electrical design:
ECG: For operation on 230V AC and 220V
DC with incorporated fuse for selective cutoff
in case of failure according to DIN EN
60598-2-22, VDE 0711-2-22, section 22.6.3.
Emergency Notleuchten Light Fittings
Bitte Subject beachten to technical Sie die changes, Hinweise imisprints Technischen andAnhang!
errors.
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
271