QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. Remove the Gun Side (R) and Grip (R). (See section 7-34 page 99).<br />
6. Disconnect the 2off Fast-on terminals from the Gun Switch.<br />
7. After removing the Gun Switch and Trigger, remove 1off self tapping screw<br />
(M3x8) and remove the Gun Bracket.<br />
Gun Harness Assy<br />
Self Tapping Screw<br />
(M3x8)<br />
Sleeve<br />
(3dia x 8)<br />
Fibre Optic<br />
Gun Bracket<br />
Trigger<br />
Fibre Optic<br />
Holder<br />
Fast-on<br />
Terminals<br />
Pipe Clip<br />
Gun Switch<br />
Flange Nut (M3)<br />
Flexible Hose<br />
O Ring<br />
8. Remove 1off flange nut (M3) and remove the Pipe Clip and Sleeve (3dia x 8).<br />
9. Separate the Fibre Optic Holder in two, and remove them from the Fibre Optic<br />
Cable. Remove the Gun Harness, including the O Ring, Fibre Optic and Flexible<br />
Hose.<br />
Page 102
Change language