QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7-20 Replacing the Flat Target Drive Cable<br />
1. Remove the upper rear maintenance door from the Target Cabinet.<br />
2. Remove 2off flange socket screws (M4x6) and remove the Flat Target Drive<br />
Cable.<br />
Flange Socket Screw<br />
(M4x6)<br />
Wire Bracket<br />
Flat Target<br />
Drive Cable<br />
3. Reassemble in reverse order.<br />
Note: When refitting the Flat Target Drive Cable ensure that the cable is wound round<br />
the motor pulley twice in a counter-clockwise direction as viewed in the<br />
direction of the arrow shown in the diagram below.<br />
Pulley<br />
Wind the drive cable<br />
counterclockwise twice<br />
(as seen from the direction<br />
of the arrow) around the<br />
pulley before fixing<br />
to the wire bracket.<br />
Flat Target<br />
Drive Cable<br />
Flat Target Motor<br />
Page 80