QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7-32 Removing the Xenon Fan and Filter<br />
CAUTION<br />
<strong>The</strong> Xenon Assy remains hot and continues to carry a high voltage charge even after<br />
turning the power OFF. Wait at least five minutes after turning the power OFF before<br />
performing any maintenance work (troubleshooting, repairs etc.) on the Xenon Assy.<br />
1. Remove 2off pozi head screws (M4x12) and remove the Filter Bracket.<br />
Xenon Assy<br />
Filter<br />
Pozi head screw<br />
(M4x12)<br />
Filter Bracket<br />
2. Remove the Filter from inside the Filter Bracket.<br />
3. Disconnect connector (CN37), remove 4off pozi head screws (M4x45), with<br />
spring and toothed lock washers, and remove the Xenon Fan<br />
Xenon Assy<br />
Connector<br />
(CN37)<br />
Xenon Fan<br />
Finger Guard<br />
Pozi head screw<br />
(M4x45)<br />
(with spring and<br />
toothed lock washer)<br />
4. Reassemble in reverse order.<br />
Page 97
Change language