QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7-16 Replacing the Launcher Sensor<br />
1. Remove the upper rear maintenance door from the Target Cabinet.<br />
2. Disconnect the connector (CN26).<br />
3. Remove 2off pozi flange head screws (M4x6) and remove the Launch Sensor<br />
complete with Sensor Bracket.<br />
Connector<br />
(CN26)<br />
Sensor Bracket<br />
Pozi flange screw<br />
(M4x6)<br />
4. Remove 1off pozi head screw (M4x12) and remove the Launch Sensor from the<br />
Sensor Bracket.<br />
Pozi head screw<br />
(M4x12)<br />
Launcher Sensor<br />
Sensor Bracket<br />
5. Reassemble in reverse order.<br />
Note: It is recommended that loctite 242 is applied to the pozi head screw (M4x12)<br />
when reassembling.<br />
Page 73