QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7-33 Replacing the Gun Assy<br />
Note: When removing the Gun Assy from the top cover on the Gun Cabinet, take care<br />
not to bend, pull or scratch the harness or fibre optic cable.<br />
1. Remove the Fibre Optic Cable. (See section 7-30 page 93)<br />
2. Remove 4off Security screw (M5x10) that retains the Pipe Bracket, and pull the<br />
Gun Assy out from the Gun Cabinet.<br />
Top Cover<br />
(gun cabinet assy)<br />
Security Screw<br />
(M5x10)<br />
Gun Assy<br />
Pipe Bracket<br />
3. Disconnect connector (CN38) and remove the Gun Assy.<br />
Pipe Bracket<br />
Gun Assy<br />
Fibre Optic Cable<br />
Pipe Bracket<br />
Connector<br />
(CN38)<br />
Top Cover<br />
(gun cabinet )<br />
Details of the Pipe Bracket<br />
4. Reassemble in reverse order.<br />
Note: Install the Top Cover so that the ‘L’ shaped bracket on the rear of the Pipe<br />
Bracket is at the top.<br />
Page 98