QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7-30 Replacing the Xenon PC Board<br />
CAUTION<br />
<strong>The</strong> Xenon Assy remains hot and continues to carry a high voltage charge even after<br />
turning the power OFF. Wait at least five minutes after turning the power OFF before<br />
performing any maintenance work (troubleshooting, repairs etc.) on the Xenon Assy.<br />
Note: PC Boards are susceptible to damage from static electricity. Anti static precautions<br />
should be taken when removing, handling and refitting the PC Board.<br />
1. Remove 2off Button head screws (M5x35) and remove the front maintenance<br />
door from the Gun Cabinet.<br />
Button head Screw<br />
(M5x35)<br />
Front<br />
Front<br />
Maintenance Door<br />
2. Remove 2off pozi head screws (M4x12) and remove the Cover in the direction of<br />
the arrow, as shown in the diagram below.<br />
Cover<br />
Xenon Assy<br />
Pozi head Screw<br />
(M4x12)<br />
Page 93
Change language