QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
QUICK & CRASH - The International Arcade Museum
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7-15 Replacing the Launcher Solenoid<br />
1. Remove the upper rear maintenance door from the Target Cabinet.<br />
2. Remove 1off pozi flange head screw (M4x6) and disconnect the Ring Tag<br />
Terminal and Connector (CN25).<br />
3. Remove 4off socket flange screws (M6x10), with flat and spring washers, and<br />
remove the Launcher Solenoid.<br />
Pozi Flange Screw<br />
(M4x6)<br />
Ring Tag<br />
Socket Flange Screw<br />
(M6x10)<br />
(with flat and spring washer)<br />
Connector<br />
(CN25)<br />
Launcher Solenoid<br />
4. Reassemble in reverse order.<br />
Note: After replacing the solenoid, ensure that the solenoid position is adjusted<br />
correctly. (See section 6-4 page 43)<br />
Page 72