Versamark CS410 - Kodak

Scope
This Operator’s Guide gives data for the Kodak Versamark CS410 System
Controller and includes this data: PSI procedures, system controller
procedures, capabilities, operations, configuration, specifications, and
basic maintenance for the system controller.
See Kodak Prosper S10 Imprinting System Basic Operations Guide for
examples and procedures on how to correct print defects.
NOTE
Due to continuing improvement in the controller products, there can be
small differences between the actual hardware and software and the
hardware and software shown in this book.
The Kodak Prosper S10 Imprinting System is a modular product, and each
module has one or more documents that guide safe operation. As necessary,
refer to these guides.
• Kodak Prosper S10 Imprinting System Overview—describes the
printing system, each module, and available options.
• Kodak Prosper S10 Imprinting System Glossary—lists and defines
all technical terms that an operator needs to know.
• Kodak Prosper S10 Imprinting System Basic Operations Guide—
has procedures to remove, install, and wipe the printhead, and to
swab and clean the eyelid.
• Kodak Prosper S10 Jetting Module Replace and Pack Guide—
has procedures to purge, remove, pack, unpack, install, and fill a
jetting module.
• Kodak Prosper S10 Printer Operator’s Guide—has procedures to
operate and maintain the printer and its components.
• Kodak Versamark DC3800 Printhead Carriage Operator’s
Guide—has procedures to operate and maintain the carriage and
its printhead mounts.
Operator’s Guide 3