Versamark CS410 - Kodak

Chapter 3. Advanced Operations
Use an MPC Manual Setup
• Line Height—For a font with a zero inter-line spacing (ILS), you
can increase the line spacing by increasing the line height. For a
font with a non-zero ILS, you can decrease the line spacing to the
point where the result of the ILS is zero. You cannot decrease the
line spacing to result in a negative ILS, which makes the lines
overlap. You cannot remove white space built into the font
character cell.
• Rotation—Select the rotation for the field being specified. Each
print field can be rotated individually. There are four possible
rotations in relation to the top-of-page position (0X, 0Y). The
illustration that follows shows a text character in each rotation.
Upright is the normal text for fields. Normal text in an upright field reads
from left to right with the reader looking from the printhead in the direction
of substrate movement. Character alignment is font dependent and can
vary independently of field rotation; the examples in the illustration show a
character aligned upright in its cell or bounding box.
Messages
Under the heading Fixed messages are listed the defined default fixed
messages for new MPC jobs.
Edit a Message.
1. Select the message.
The message comes into view in an edit box in the tab. All characters
on the keyboard can be used, to include punctuation marks and
symbols.
2. Make the necessary changes.
3. Select Apply.
Add a Message.
1. Select .
78 Kodak Versamark CS410 System Controller