Inogen One G3 Technical Manual
Inogen One G3 Technical Manual
Inogen One G3 Technical Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. To remove the back housing, place the device on its front side and remove the two screws<br />
that secure the back housing to the chassis (Figure 2).<br />
Figure 2: Location of screws<br />
3. With the concentrator still on its front side, slide the back housing down and away from<br />
the device then lift up to remove (Figure 3).<br />
Figure 3: Direction to slide housing<br />
4. To remove the front housing, place the device on its back side and remove the two screws<br />
that secure the front housing to the bottom of the chassis (Figure 4).<br />
96-03997-00-01 revA Service <strong>Manual</strong>, <strong>Inogen</strong> <strong>One</strong> <strong>G3</strong><br />
- 37 -