Inogen One G3 Technical Manual
Inogen One G3 Technical Manual
Inogen One G3 Technical Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. To remove the back housing, place the device on its front side and remove the two screws<br />
that secure the back housing to the chassis (Figure 2).<br />
Figure 2: Location of screws<br />
3. With the concentrator still on its front side, slide the back housing down and away from<br />
the device then lift up to remove (Figure 3).<br />
Figure 3: Direction to slide housing<br />
4. To remove the front housing, place the device on its back side and remove the two screws<br />
that secure the front housing to the chassis (Figure 4).<br />
96-03997-00-01 revA Service <strong>Manual</strong>, <strong>Inogen</strong> <strong>One</strong> <strong>G3</strong><br />
- 69 -