Inogen One G3 Technical Manual
Inogen One G3 Technical Manual
Inogen One G3 Technical Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Figure 4: Location of screws<br />
5. Slide the front housing down and away from the device then lift up to remove.<br />
6. With the side housing removed, locate and remove the four screws that connect the user<br />
interface panel to the chassis (Figures 5 and 6).<br />
Figure 5: Location of rear screws<br />
96-03997-00-01 revA Service <strong>Manual</strong>, <strong>Inogen</strong> <strong>One</strong> <strong>G3</strong><br />
- 77 -