FSUTMS Comprehensive Modeling Workshop - Cambridge ...

Display Highway Paths (Cont’d)
Step 3 Instructions: Display Highway Path
Exercise 5.2.1
► With the Path Building (Time) dialog box still open, enter the following
combination 277-400
for the origin and 277-330
for the destination and
then click on Single Color box. Select a color and then click OK.
► Click on List Path Traces box and enter a TAZ combination. This will
display the time between nodes in parentheses in minutes in the
Traces box.
► Click on Isochromes box. This will display the Isochromes Display
dialog box. Enter a Cost Increment. . For this example enter 10 and
click on OK. . In the origin zone enter 388 and in the destination zone
enter ALL. . Hit the Enter key or the Display button.
► Click on the Close button to clear the paths and exit the Path Building
dialog box. Close Cube by clicking on the outside X at the top of the
screen.
FSUTMS--CUBE MODELING TRAINING SERIES
97
FSUTMS--CUBE MODELING TRAINING SERIES
98
5-49