FSUTMS Comprehensive Modeling Workshop - Cambridge ...

Selected Link and Selected Zone Analysis
► Used to determine the origin and destination of trips
traversing a specific link, zone, or node.
► Typically used in identifying travel patterns or major
movements and traffic impact analyses.
► Performed during the assignment step using a
PATHLOAD statement.
► Outputs an additional volume set that provides the
number of trips on each link that traverse the selected
link, zone, or node.
► Can also output a matrix of volumes for the zones that
traversed the selected link, zone, or node.
FSUTMS--CUBE MODELING TRAINING SERIES
13
Scripting
► Overview
Voyager is a modular system with 7 modules for
modeling and 1 special module for flow control
(feedback).
The modules can be put in any order to reflect any
methodological approach to modeling.
The order of the modules and the file input and output is
controlled with Cube Base.
Some modules have Phases which require that certain
functions are located within certain phases.
The scripting language used for Cube Voyager is called
Cube Power Scripts (CPS).
Scripts are used to run each step of the model.
FSUTMS--CUBE MODELING TRAINING SERIES
14
11-7