2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

INTAKE MANIFOLD GASKETS (SOLD IN PKG. OF 2)
NOTE: None of the following race-quality gasket kits include rubber end seals.
Use RTV sealer or production end seals.
Intake Manifold Gasket M-9439-B302 with Print-O-Seal ®
PART NUMBER MANIFOLD APPLICATION CYLINDER HEAD APPLICATION PRINT-O-SEAL ® GASKET THICKNESS ± .004
M-9439-A302* M-9424-A321 289/302/351W, M-6049-J302/K302/L302/L303/Y302/ Yes 0.050"
Y303 no EGR
M-9439-B302** All 289/302/351W, M-6049-J302/K302/L302/L303/Y302/ Yes 0.050"
Y303 with EGR
M-9439-A50* All M-6049-L302/L303/X302/X303/X304/X305/Y302/Y303 Yes 0.070"
with or without EGR ➀➁➂
M-9439-A51* All M-6049-L302/L303/X302/X303/X304/X305/Y302/Y303 No 0.090"
without EGR ➁➃
M-9439-E460* M-9424-C460 M-6049-C460/D460 No 0.060"
M-9439-F460* M-9424-C460 M-6049-C460/D460 No 0.125"
M-9439-R352* M-9424-W352 M-6049-C3H No 0.050"
NOTES: ➀ Synthetic rubber Print-O-Seal ® (Fel Pro Inc.) bead around ports provides improved sealing.
➁ Redesigned for improved port location and allows mild porting.
➂Teflon coated, steel reinforced.
➃ Similar to M-9439-A302 without Print-O-Seal ® .
OIL PAN GASKET SET
(ENGINE)
M-6781-A341** 351W
Consists of 2 side rail gaskets
and 2 rubber end seals.
CRANKSHAFT REAR OIL SEAL
M-6701-A460** 429/460/600 two-piece, split-lip design
M-6701-B351** 351W from 7/11/83, Ford Racing one-piece seal.
Use on Ford Racing 351W blocks manufactured
after 6/1/93.
High-temperature resistant Viton material.
NOTE: Use E5ZZ-6701-A one-piece seal for 1983 and later
2.3L OHC models. Available at your Ford or Lincoln-Mercury dealer.
REAR MAIN SEAL
M-6701-B302**
• Direct replacement one-piece crankshaft rear main seal
for 1983-02 5.0L/302 blocks
• Also fits Ford Racing blocks M-6010-R302, M-6010-A50 and M-6010-B50
ENGINE
COMPONENTS
EXHAUST MANIFOLD GASKETS – RACE QUALITY (SOLD IN PAIRS)
PART NUMBER CYLINDER HEAD APPLICATION
M-9448-A351* “Sportsman” head
M-6049-N351/R351
M-9448-B302** Production 289/302/351W,
M-6049-Y303/L302/X302/X303
M-9448-A462* 4.6L SOHC
M-9448-A464* 4.6L DOHC
M-9448-B302 shown
NOTE: Header flanges available from Hedman headers. Contact local distributor.
M-9448-A462 shown
VALVE ROCKER ARM COVER GASKETS (SOLD IN PAIRS)
PART NUMBER APPLICATION DESCRIPTION/NOTES
M-6584-A50** 5.0L/302/351W Production-type design featuring metal gasket with bonded
O-ring. Part of high-performance 5.0L gasket kit M-6051-A50
(see page 102). Designed for valve covers without a gasket lip.
M-6584-A460* 429/460 Wedge Competition quality gasket set. Cork-rubber material is
laminated to a steel core to produce superior strength and
resistance to distortion and creep. Recommended for use
with M-6582-C460/R460 die-cast rocker arm cover.
M-6584-A452* 351C/351M/400 Precision edge—molded silicone rubber sealing beads on a
and
rigid carrier to resist high heat and high vacuum. Built-in torque
M-6049C3L/SCI/ limiters prevent over compression and gasket splitting.
C3H/D3 Heads Great for on-again/off-again applications.
M-6584-A50 shown
M-6584-A452 shown
*Not legal for sale or use on pollution-controlled motor vehicles.
**Direct replacement part.
www.fordracingparts.com 103