2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

CLUTCHES
PART NUMBER DESCRIPTION ENGINE DIAMETER TECHNICAL INFORMATION
M-7550-A302N Disc V-8 10.5" HD organic lining. Component of M-7560-A302/C302 kits.
➀➁➂
M-7550-X302 Disc V-8 10.5" HD disc with carbon/copper lining on flywheel side and carbon lining on pressure
➀➁➂
plate side.
M-7550-T302 Disc V-8 10.5" HD disc with carbon/copper lining on flywheel side and carbon lining on pressure
➀
plate side. Designed for 26 spline shaft on M-7003-R58C, M-7003-R58W and
M-7003-R58H transmissions. Will work with M-7563-A/B/C/D302 pressure plates.
M-7563-A302N Pressure Plate V-8 10.5" HD diaphragm type with approx. 40% more capacity than stock Mustang unit.
➀➂➃
Nodular iron plate.
M-7563-B302 Pressure Plate V-8 10.5" HD diaphragm type with centrifugal assist. Has approx. 25% more capacity than
➀➂➃
stock Mustang unit. Cast iron plate.
M-7563-C302N Pressure Plate V-8 10.5" HD “King Cobra” diaphragm type. Same capacity a M-7563-A302N above, but
➀➂➃ stronger cover and revised internal geometry reduce clutch pedal effort by 10%.
Nodular iron plate.
M-7563-D302N Pressure Plate V-8 10.5" Same as M-7563-C302N “King Cobra” unit above but has been lightened for
➀➂➃ Mustang reduced inertia. This is the hot ticket for road racers as it increases acceleration
off the corners.
M-7560-A302N Mustang HD V-8 10.5" Consists of M-7550-A302N disc, M-7563-A302N pressure plate and D9ZZ-7548-A
➀➁➂➃ Clutch Kit throwout bearing.
M-7560-C302N Mustang HD V-8 10.5" Consists of M-7550-A302N disc, M-7563-C302N pressure plate and D9ZZ-7548-A
➀➁➂➃ “King Cobra” throwout bearing.
Clutch Kit
M-7560-T46 11" Clutch Kit 4.6L 11" Kit contains 11" clutch disc with 26 spline hub and pressure plate. Clutch disc with
➀
carbon/copper lining on flywheel side and carbon lining on pressure plate side.
Centrifugal assist design pressure plate with 25% more torque capacity then
production Cobra. Used when installing M-7003-R58C, M-7003-R58H and
M-7003-R58W transmissions into 1996-04 4.6L Mustangs with production
11" flywheel or Ford Racing flywheels M-6375-F46, M-6375-G46 or M-6375-R00.
M-7060-C46 11" Clutch 4.6L DOHC 11" This kit increases clutch capacity by 10% on 1996-98 Cobra 4V vehicles. It consists
➀➁ Upgrade Kit of the production 1999 Cobra 4V flywheel, 11" clutch/pressure plate assembly and
attaching bolts/dowel pins to replace the 10.5" clutch assembly in the 1996-98
Cobra 4V vehicles.
M-7060-D46 11" Clutch Kit V-8 11" Kit increases clutch capacity of the 1996-98 Mustang Cobra 4.6L DOHC 4V by
10% and increases clutch disc burst speed 10% over 1999-01 Cobra. Kit contains
2003 Cobra match balanced aluminum flywheel and 11" pressure plate,
11" clutch disc and alignment dowels.
NOTES: ➀ Clutches have NO warranty!
➁ All clutch discs have 1.0625"-10 spline hub.
➂ Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with 3650 transmission and 1999-03
Cobra use an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates, but do NOT install a FRPP pressure plate with
a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped
with 10" clutch requires new flywheel (see page 129). Metric fasteners and dowel pins must be used with 10.5" clutches.
➃ Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-B. Ford Racing kit M-6397-A302 (see page 129).
CHASSIS
COMPONENTS
*Not legal for sale or use on pollution-controlled motor vehicles.
**Direct replacement part.
www.fordracingparts.com 131