2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

PULLEYS
SERPENTINE BELT HORSEPOWER PULLEY KITS —
MUSTANG 5.0L
M-8509-A50 1987-93 5.0L Mustang
with serpentine drive belt,
A/C and power steering.
(E.O. #D-308)
M-8509-A51* 1994-95 Mustang with
serpentine belt drive,
Serpentine Belt Horsepower Pulley Kit
A/C and power steering.
M-8509-A50 shown
M-8509-A50* Truck 5.0L/302–1987-96
and 5.8L/351–1988-96
Contains steel crankshaft, water pump and alternator pulleys, plus bolts and installation instructions.
Reduces accessory drive RPM by: (water pump–14%) and (alternator–22%)…and significantly
improves performance! Pulleys are manufactured on state-of-the-art CNC machines and have an
awesome blue finish over zinc plating. Pulleys use production serpentine belt.
WARNING: Engine cooling will be reduced.
OFF-ROAD IDLER BRACKET
(1979-93 MUSTANG)
M-8604-A50*
Competition air pump idler bracket for off-road
use only, where air pump is not necessary. This
idler is a direct bolt-on replacement for stock
air pumps and uses a standard serpentine belt.
Fits 302/351 Mustang applications when catalytic
converters are not used. Uses stock belt.
1965-69 MUSTANG
BILLET SINGLE GROOVE
PULLEY SET
M-8509-CM*
• Fits 1965-69 Mustang with 289/302/351W
• 3-bolt crank pulley
• Single groove crank pulley
• Single groove water pump pulley
1970-78 MUSTANG
BILLET SINGLE GROOVE
PULLEY SET
M-8509-DM*
• Fits 1970-78 Mustang with 302/351W/351C
• 4-bolt crank pulley
• Single groove crank pulley
• Single groove water pump pulley
M-8509-CM shown
1970-78 MUSTANG
BILLET DUAL GROOVE
PULLEY SET
M-8509-EM*
• Fits 1970-78 Mustang with
289/302/351W/351C
• 4-bolt crank pulley
• Dual groove crank pulley
• Single groove water pump pulley
351W ENGINE SWAP
ACCESSORY DRIVE KITS
(1985-93 MUSTANG)
M-8511-A351 Power steering
bracket only
M-8511-B351 Power steering and
air conditioning bracket.
These brackets allow use of your 5.0L front end
accessory drive components when swapping to
a 351W (5.8L) engine. Simply replace production
bracket with the new bracket using all existing
bolts and hardware. Serpentine belt selection
will vary, depending on whether or not you
choose to use optional underdrive pulleys.
ENGINE
COMPONENTS
A.C. ELIMINATOR KITS
M-19216-A50 Fits 1994-95 Mustang and
1991-93 Thunderbird with 5.0L engine
M-19216-D46 Fits 1996-06 Mustang
with 4.6L engine SOHC/DOHC
• Cast aluminum idler pulley bracket replaces the air
conditioning compressor
• Removes weight from the front of car for better weight
transfer when racing
• Bolts included
• Uses stock belt
A.C. ELIMINATOR KIT
M-8511-A50*
Bracket conversion kit to remove air
conditioning compressor for racing
applications. This two-piece bracket kit
moves the power steering pump up to
where the A.C. compressor was.
Fits 1985-93 Mustang. Requires new
belt (not included). Hardware included.
M-8511-B351
M-8511-A351
UNDERDRIVE HORSEPOWER
PULLEY KIT
M-8509-D462* 1996-98 Mustang
(Does not fit 1999-04)
• Significant power increase, reduces power
loss from accessories by reducing accessory
pull speed
• 3-piece kit with hardware and instructions
• 4.6L SOHC engines
• Aids acceleration by reducing accessory speed
compared to crankshaft
WARNING: Engine cooling will be reduced.
*Not legal for sale or use on pollution-controlled motor vehicles.
**Direct replacement part.
www.fordracingparts.com 93