2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

NASCAR RACE WATER
PUMP ASSEMBLY
M-8501-D351S*
• High-performance water pump
for 302/351W with V-belt drive
• Precision ground 1/2" steel billet fan hub
with dual bolt pattern and fan hub set screw
for positive positioning
• 356-T6 heat-treated aluminum specially
ribbed casting for increased strength
• 3/4" bearing featuring a ball/roller internal
design that increases the radial load
capacity of the bearing to make it up to
5 times stronger than a standard bearing
• Severe duty, high-flow, high-pressure pump
• 6-blade cast iron impeller, precision
machined and balanced
• 5.700" hub height
• Use with standard rotation timing chain
cover like M-6059-D351
• Recommended for high-RPM endurance
applications
WATER PUMP HOUSING
M-8505-B331*
Fits all small blocks. Aluminum housing.
Widely used in all types of competition.
NOTE: Water inlet is on left (driver side)
of engine. Assemble using M-8564-A351
kit and M-8512-A302 impeller.
NOTE: Housing accepts standard 351W
rear cover plate. Available from Raceparts
Distribution Inc. (704) 892-8688.
WATER PUMP
ASSEMBLY KIT
M-8564-A351*
For use with M-8505-B331 housing and
M-8512-A302 impeller. The brass slinger
sleeve must be removed to assemble water
pump. The kit contains bearing shaft, seal
and seat assembly and fan hub.
351 FORD RACING NASCAR
WATER PUMP KIT
M-8501-A58* Housing and Spacers
M-8501-R351* Water Pump
Designed to meet the durability requirements
of NASCAR race engines, this new pump
has many impressive features.
• Improved efficiency, requires 2.5 HP less
to drive the pump at 8000 pump shaft RPM,
than our present pump. A 40% reduction
• Pumps 53 gallons per minute
at 8000 pump shaft RPM
• Bolts directly onto “Yates” belt drive front cover.
Production front cover requires adapter plates
included in the kit
• Removable pump assembly for easy service,
making rebuilds unnecessary
• Improved reliability, no rear cover plate to leak
STOCK FLOW
REPLACEMENT
WATER PUMPS
M-8501-C50
• Reverse rotation serpentine belt aluminum
water pump for 1986-93 5.0L/5.8L engines
• Standard shaft and bearing with
stamped impeller
• Provides good
flow and
pressure
for engines
that operate
below 6000 RPM
• Can be used on
1979-85 with minor modifications
M-8501-G351**
• Standard rotation V-belt aluminum
water pump for 5.0L/5.8L engines
stamped impeller
• Provides good
flow and
pressure
for engines
that operate
below
6000 RPM
• Can be used with
M-6059-D351 timing chain
cover or stock V-belt timing cover
MAXIMUM FLOW
ALUMINUM WATER PUMPS
M-8501-B50
• Premium reverse rotation serpentine belt
aluminum water pump for 1986-93
5.0L engines
• Features HD 3/4" ball/roller bearing, CNC
machined curved vane impeller and billet
steel hub
• Provides maximum flow, maximum
pressure and equal distribution to both sides
of the block
ENGINE
COMPONENTS
WATER PUMP IMPELLER
M-8512-A302*
Water pumps with rear
cover and V-belt drive.
Cast iron highefficiency
curved
vanes to reduce
coolant “cavitation”
(partial vacuum)
at high RPM.
MAXIMUM FLOW 429-460
ALUMINUM WATER PUMP
M-8501-C460 Fits 429-460 big blocks
Premium quality aluminum casting. Driver side
water inlet. Maximum flow capacity. Accepts stock
brackets and pulleys for most 1970 and newer V-
belt engines. Standard rotation.
NOTE: Now used on 460 and 514 crate motors
M-8501-F351
• Premium standard rotation aluminum water
pump for 1970-78 5.0L and 1970-87
351W engines
• Same features as M-8501-B50 pump
*Not legal for sale or use on pollution-controlled motor vehicles.
**Direct replacement part.
www.fordracingparts.com 95