2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...
2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...
2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CONNECTING RODS AND PISTONS<br />
460 CONNECTING ROD SET<br />
M-6200-A75* (Set of 8)<br />
• Production HD truck connecting rods<br />
• Great for engine rebuilds<br />
• All stock dimensions, for press fit wrist pin<br />
5.0L/302 PRODUCTION<br />
CONNECTING RODS<br />
M-6200-M50** (Set of 8)<br />
• Connecting rods for 1968-00 5.0L/302<br />
• For about the cost of a quality remanufactured set, these new<br />
connecting rods are ready to go. No exchange required<br />
• 5.090" rod length<br />
514 STROKER EAGLE H-BEAM<br />
CONNECTING RODS<br />
M-6200-C514*<br />
• Used in M-6007-C514/D514 engines and M-6009-C514/D514<br />
short blocks<br />
• 6.605" standard 460 connecting rod center to center distance<br />
• Small end bushed for .990" floating wrist pin<br />
• 7/16" capscrew rod bolts<br />
• SAE 4340 forged steel<br />
• Sold in weight-matched sets of 8<br />
• All surfaces are 100% machined<br />
• Multi-stage heat treat, shot-peened, x-rayed, sonic tested<br />
and magnafluxed to ensure quality<br />
• Bearing cap doweled for alignment<br />
5.0L/302 “SPORTSMAN”<br />
CONNECTING RODS<br />
M-6200-D50* (Set of 8)<br />
• SAE 4130 forged steel<br />
• Used in M-6013-B347 / M-6009-B347 / M-6007-C347<br />
• 5.40" center to center length<br />
• Bushed for full floating .912" wrist pins<br />
• ARP 3/8" 190,000 psi bolts<br />
• Weight-matched end to end to +/-2 grams<br />
347 FORGED PISTONS<br />
M-6108-C347* (Set of 8)<br />
• Forged pistons used in M-6007-C347/D347 crate engine<br />
• 4.000" +.030" overbore<br />
• Valve notches for use with GT40 or Z304 cylinder heads<br />
• Flat top, 3cc notch volume 1.09" compression distance<br />
.912" pin diameter<br />
• 1/16", 1/16", 3/16" rings required<br />
351W FORGED PISTON<br />
M-6108-Z351* (Set of 8)<br />
• Forged piston used in the M-6009-E58 short block<br />
• 4.000" standard bore<br />
• Valve notches for use with GT40 or Z304 cylinder heads<br />
• 17cc dish, 1.785" compression distance, .912" pin<br />
• 1/16", 1/16", 3/16" rings required<br />
ENGINE<br />
COMPONENTS<br />
5.8L/351W “SPORTSMAN”<br />
CONNECTING RODS<br />
M-6200-D351* (Set of 8)<br />
• SAE 4130 forged steel<br />
• Connecting rods for 351W engines<br />
• Stock 5.956" rod length, bushed for .912" floating pin<br />
• ARP 3/8" 190,000 psi bolts<br />
• Fits stock 351W crank journal<br />
• Weight-matched end to end to +/-2 grams<br />
• Used in M-6013-B392 / M-6009-A392/B392/C58 /<br />
M-6007-A392/D392/A351R/D351R/C351R/E351R<br />
392 FORGED PISTONS<br />
M-6108-C392* (Set of 8)<br />
• Forged piston used in the M-6007-A392E/D392E crate engines<br />
• 4.000" +.030" overbore<br />
• Valve notches for use with GT40 or Z304 cylinder heads<br />
• 15cc dish, 1.615" compression distance, .912" diameter pin<br />
• 1/16", 1/16", 3/16" rings required<br />
514 FORGED PISTONS<br />
M-6108-C514* (Set of 8)<br />
• Forged piston used in M-6007-D514 crate engine<br />
• 4.360" +.030" overbore<br />
• Valve notches for use with M-6049-C429 heads and<br />
M-6049-SCJB heads<br />
• 30cc dish, 1.545" compression distance, .990" diameter pin<br />
• 1/16", 1/16", 3/16" rings required<br />
M-6108-C392 shown<br />
*Not legal for sale or use on pollution-controlled motor vehicles.<br />
**Direct replacement part.<br />
www.fordracingparts.com 77
Change language