2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

BRAKE BACKING PLATE
T-BOLTS
M-4002-A
• T-Bolts used on 9" axle
housing to attach the
brake backing plate
• 3/8-24 x 1.35"
• Sold in bulk box of 100
DIFFERENTIAL BEARING
ADJUSTER LOCK AND
BOLT KIT
M-4144-B
Kit includes 2 locks and 2 bolts to secure
differential bearing adjusting nuts on 9" nodular
carriers produced after November 1989.
9" TRACTION-LOCK
REBUILD KIT
M-4700-A
• Kit includes:
– 4 plates with friction material
on both sides
– 1 plate with friction material on 1 side
– 4 steel plates
• This kit will renew the torque bias
characteristics of all 9" Ford Traction-Lok
differentials
BRAKE BACKING PLATE
T-BOLT AND NUT KIT
M-4002-B
• Use to attach brake backing plates to 9"
axle housings
• 3/8-24 x 1.3" T-bolts and locking nuts
• Sold in axle sets of 8 bolts and nuts
DIFFERENTIAL BEARING
ADJUSTING NUT
M-4067-A Stamped. 2.9687"
(Sold separately)
• M-4067-A nut services M-4141-B
nodular carrier
SHOULDER BOLT
M-4216-A100 Sold in pkg. of 10
1/2" dia. shoulder and 7/16" threads. Allows
use of ring gear with 7/16" dia. threaded holes
on differential carrier designed for ring gear with
1/2" diameter holes. (Direct replacement for
discontinued shoulder bolt C3AZ-4216-A.)
NOTE: Will NOT fit traction-lock differentials.
BOLT – RING GEAR TO
DIFFERENTIAL CASE
M-4216-A200 Sold in pkg. of 100
M-4216-A210 Sold in pkg. of 10
The most popular 9" ring gear bolt, for use on
open differentials, Detroit Lockers and spools.
NOTE: Will NOT fit Traction-lock differentials.
Same as flywheel bolts, see page 129.
SMALL PARTS KIT
M-4663-A100
Kit includes:
• Pinion nut
• O-ring
• Collapsible spacer
• Gear marking compound
• Brush
• Shims to set pinion gear depth
DIFFERENTIAL BEARING
ADJUSTING NUT
M-4067-B
• Machined steel 9" differential bearing
adjuster nut (Sold separately)
• Outside diameter: 2.9687"
• Dimensionally same as M-4067-A but has
improved strength for applications requiring
an upgrade
8" AND 9" FORD
DIFFERENTIAL BOLT KIT
M-4216-B Sold in pkg. of 10
• Fits 8" and 9" Ford
Traction-Lok differentials
• Attaches ring gear
to differential
9" SHIM KIT
M-4663-A201
Kit includes the same shims used in the M-
4663-A100 small parts kit. The shims are
0.010" to 0.020" thick in .002" increments.
CHASSIS
COMPONENTS
*Not legal for sale or use on pollution-controlled motor vehicles.
**Direct replacement part.
www.fordracingparts.com 137