2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

2003 MUSTANG MACH1 4.6L DOHC 4V ENGINE ASSEMBLY
M-6007-M146**
• Complete engine assembly from the dual bore throttle body to the oil pan
• 305 HP @ 5800 RPM, 320 ft./lbs. of torque @ 4200 RPM
• Great for high-tech street rods and custom built cars
• Premium fuel required
• Direct replacement for 2003 Mustang Mach 1 engine
• Steel 8-bolt crankshaft
• Calibration code 3G-301-AA
See Also...
• Crate Engine Build-Up
• “Cammer Engine” Build-Up
• Crate Engine Warranty
• Engine Tips & Specs
• Crate Engine Catalog
5.0L “CAMMER” MODULAR CRATE ENGINE ASSEMBLY
M-6007-T50EA*
The 5.0L DOHC 4-valve “Cammer” engine is an upgraded variant of the
4.6L DOHC 4-valve Mustang Cobra engine, with numerous changes for
improved power and durability. This engine is completely electronically
managed. As part of the “Cammer” crate engine program, a stand-alone
harness and engine management computer will be available separately.
This will allow the engine to be used for many applications.
With proper headers (not included) and low restriction air intake and
vehicle exhaust systems, the engine will exceed 400 Bhp and have a very
broad torque curve, peaking over 365 ft./lbs.
Among the many features of the 5.0L Cammer are:
• Variable geometry long/short runner, magnesium intake manifold
assembly
• All new Ford Racing 356 alloy aluminum block, specifically designed
for this 5.0L engine program
• Ford Racing high-flow cylinder heads
• Ford Racing 12mm lift camshafts with unique valves, springs
and rocker arms
• High-strength racing connecting rods
• Forged pistons with 11:1 compression ratio (nominal)
• Complete with power steering pump, alternator
and air conditioning compressor
• Photo and specs may vary
This assembly is basically a package of the high-performance modular
DOHC 4-valve components being offered in the Ford Racing Performance
Parts Catalog. These parts are currently in use as the core for a number of
widely varying race engine applications. Modular 4.6L and 5.0L DOHC 4-
valve engines have been successfully used in drag racing, circle track and
road racing. Further component development takes place on a continuous
basis at Ford Racing, and will result in ever-expanding parts availability for
this engine family.
See Also... Crate Engine Build-Up
“Cammer Engine” Build-Up
Crate Engine Warranty
Engine Tips & Specs
Crate Engine Catalog
For additional modular engine applications, see www.fordracingparts.com
CRATE
ENGINES
Did you know…
The new Ford GT head is a derivative of the 2000 Cobra R head. Those same heads
have been used on the Rough Rider off-road racing program to make nearly 700hp out of
6 liters naturally aspirated!
*Not legal for sale or use on pollution-controlled motor vehicles.
**Direct replacement part.
www.fordracingparts.com 41