2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

HIGH-FLOW RATE FUEL INJECTOR SETS
Kit contains high-flow rate fuel injectors, specially designed for race applications. These injectors work best with air meters
with revised calibrations. Not recommended for stock air meters.
PART NUMBER (SETS OF 8) PART NUMBER (SETS OF 4) FLOW RATE INJECTOR TYPE IMPEDANCE
M-9593-A302* M-9593-A304* 24 lbs./hr. EV1 11-18 ohms
M-9593-AA302* N/A 24 lbs./hr. EV6 with EV1 Connector 11-18 ohms
M-9593-B302* M-9593-B304* 30 lbs./hr. EV1 11-18 ohms
M-9593-C302* M-9593-C304* 19 lbs./hr. EV1 11-18 ohms
M-9593-F302* M-9593-F304* 42 lbs./hr. EV1 11-18 ohms
M-9593-E303* M-9593-E304* 150 lbs./hr. EV1 4-6 ohms
M-9593-M23* M-9593-M234* 23 lbs./hr. EV6 11-18 ohms
M-9593-M31* N/A 30 lbs./hr. EV6 with EV1 Connector 11-18 ohms
M-9593-M39* M-9593-M394* 39 lbs./hr. EV6 11-18 ohms
M-9593-T46* N/A 34 lbs./hr. EV6 with EVI Connector 11-18 ohms
EV1
shown
HIGH-FLOW MATCHED FUEL INJECTOR SETS
Ford Racing has flowed a large quantity of injectors, and sorted and matched injectors with similar flow rates.
These injectors are then packaged in sets. The end result is fuel injector sets with very small variations in flow.
Typical production injectors can vary as much as 6-7%. These kits vary less than 1%, but typically vary less than .5%.
The result is improved fuel control and optimized performance, drivability and economy. These injectors are attractively
priced and cannot be duplicated for the price.
PART NUMBER (SETS OF 8) PART NUMBER (SETS OF 4) FLOW RATE INJECTOR TYPE IMPEDANCE
M-9593-A302F* M-9593-A304F* 24 lbs./hr. EV1 11-18 ohms
M-9593-B302F* M-9593-B304F* 30 lbs./hr. EV1 11-18 ohms
M-9593-F302F* M-9593-F304F* 42 lbs./hr. EV1 11-18 ohms
M-9593-M23F* M-9593-M234F* 23 lbs./hr. EV6 11-18 ohms
M-9593-M39F* M-9593-M394F* 39 lbs./hr. EV6 11-18 ohms
NOTE: These injectors are flowed at 40-psi differential pressure, and a flow data summary is included in the package.
EV6
shown
ENGINE
COMPONENTS
46°
44°
6.2
5.1
∅ 13.30
13.05
∅ 10.25
9.95
∅ 10.2
9.8
∅ 7.9
7.7
UPPER O-RING
∅ 7.52 ± 0.18 x 3.53 ± 0.10
50°
46°
∅ 7.9
7.7
12.8
12.6
∅ 13.3
13.1
∅ 10.1
9.9
D
UPPER O-RING
∅ 7.52 ± 0.13 x 3.51 ± 0.8
5.9
5.7
25.5
MIN
3.5
3.3
1.2
0.9
34.0
33.7
33.0
32.8
1.1
0.9
34.85
34.55
(24.75)
∅ 16.15 MAX
60.7
59.7 66.6
65.1 (77.35)
25.25
24.95
60.80
59.80 66.4
65.4
74.7
73.7
14.6 GAGE
48°
42°
3.94
2.75
2.0
1.9
LOWER O-RING
∅ 7.52 ± 0.18 x 3.53 ± 0.10
∅ 7.9
7.7
E
∅ 9.4
8.9
∅ 13.4
13.0
∅ 13.2
13.1
LOWER O-RING
∅ 7.52 ± 0.13 x 3.51 ± 0.8
∅ 7.9
7.7
E
∅ 9.2
9.0
∅ 13.25
13.05
∅ 13.85 MAX
∅ 16.7 MAX
16.3
EV1
EV6
*Not legal for sale or use on pollution-controlled motor vehicles.
**Direct replacement part.
www.fordracingparts.com 115