2006 Ford Racing Performance Parts Catalog - Rocket City Mustang ...

ENGINE LUBRICATION PARTS
FORD RACING HIGH-PERFORMANCE OIL FILTERS
SOLD AS CASE OF 12
• Synthetic-Polymer/Cellulose-Fiber blend media
• Heavy gauge base and canister for higher burst strength and impulse fatigue resistance
• High-quality silicone anti-drain back valve
• Non-stick sealing gasket for ease of installation and removal
• Long life with standard and synthetic motor oils
MOTORCRAFT PART NUMBER PERFORMANCE FILTER PART NUMBER
FL300 CM-6731-FL300 (Each) ➀ M-6731-FL300 (Case of 12)
FL1A CM-6731-FL1A (Each) ➀ M-6731-FL1A (Case of 12)
FL820S CM-6731-FL820 (Each) ➀ M-6731-FL820 (Case of 12)
FL400S CM-6731-FL400 (Each) ➀ M-6731-FL400 (Case of 12)
FL1995 CM-6731-FL1995 (Each) ➀ M-6731-FL1995 (Case of 12)
FL784 CM-6731-FL784 (Each) ➀ M-6731-FL784 (Case of 12)
FL299 CM-6731-FL299 (Each) ➀ M-6731-FL299 (Case of 12)
NOTE: ➀ Check Ford Racing Distributors for single filter part numbers.
• Up to 50% more filtering capacity then standard filters
• Improved filtering efficiency
• This technology is only available through
Ford Racing Performance Parts
OIL FILTER
ADAPTER
M-6880-A50
• Screws into block and
rotates filter toward
front of engine to
provide clearance for
engine swaps and
chassis modifications
• Fits most Ford
engines that use
Motorcraft
FL-1A oil filter
90° ROTATING OIL
FILTER ADAPTER
M-6880-C50
• Recommended for all pushrod crate engines in
kit cars, street rods and race cars
• Fits all engines that use FL1A oil filter
• High-performance, high-flow adapter
machined from billet aluminum
• Can be rotated 360°
• Inlet and outlet ports
1/2" NPT,
90° to filter pad
• Adapter only, lines,
fittings and filter mount not included
• Use with M-6880-S oil filter mount
HEAVY-DUTY OIL
FILTER MOUNT
M-6880-S
• Uses extra large capacity filter
M-6731-FL784 (sold separately)
• Inlet and outlet tapped for 3/4" pipe thread
for maximum flow
ENGINE
COMPONENTS
REMOTE-MODIFIED OIL
FILTER ADAPTER KIT
M-6881-C100
All engines with 3/4"-16 thread filter and
2.435" diameter O-ring. This kit contains
all necessary parts to mount the oil filter
off the engine, including block adapter,
oil filter mount, hose and attaching parts.
Not recommended for performance engines.
Use M-6880-S
REMOTE MOUNTED OIL
FILTER ADAPTER KIT
M-6881-A54*
• Fits late model V-8 modular engines and other
engines that use a Motorcraft FL-820/FL-820S
oil filter, with 22 x 1.5mm thread filters.
Allows oil filter removal with little or no spillage.
Uses FL-1A, FL-1HP or M-6731-H filter
• The kit contains all necessary parts to
mount the oil filter off the engine, including
the block adapter, oil filter mount, hose and
attaching parts. Instructions included to
mount the filter in the wheel well on most
Mustang applications.
• NOTE: Not recommended for performance
engines
ENGINE OIL COOLER
KIT HEAVY-DUTY
SELF-REGULATING TYPE
M-6642-S101
Unique patented “stacked-plate” design
provides efficiency improvement of 35% over
"fin-and-tube" coolers. This 8" x 11" x 1.5" unit
has a heat rejection rate of 20,500 BTUs per
hour. The self-regulating feature bypasses cold
engine oil automatically (without thermostats or
valves) until oil viscosity decreases and allows
oil to flow through the main body of the cooler.
Kit includes all fittings, attaching hardware and
instructions. Use on engines with FL-1A filters.
*Not legal for sale or use on pollution-controlled motor vehicles.
**Direct replacement part.
www.fordracingparts.com 97